How to set a margin on my cannon priter it cutting off my left side fax

change he wire like if there is black wire and blue wire cut it and exchange it

Hi

By spacing, I assume you mean the margins at the centre.

The default margin settings are not the same for the right and left hand side of the page, so the printing on the reverse side is offset from the printing on the first side.

The right margin is always wider to allow for punch holes in file paper.

It is not the printer settings you need to adjust, it is the page layout of your word processing software.

Adjust the margin settings manually. In MS Office 2007:

Page Layout > Margins > Mirrored Margins.

Hope this helps.

hit the carriage return key to put carriage at left margin. then hit your margin release key, then backspace key to put your carriage where you want it. then hit left margin key and that should set new left margin. good luck.

razors

There are 3 margin keys on the keyboard of this typewriter. One is marked Mar Left, one is Mar Right, and the third is Mar Rel(ease) these are found on the left side of the keyboard, Have you tried either of these? Hope this helps

if you are only having a problem when printing an emails, most likely the setting in your email client (browser in the case you are using an online web-client).

check your OUTLOOK or the browser's printing settings

I can't be for sure if these are auto set margins, but it sounds like they might be. If they are, first move the carriage as far to the right as you can. Hold the Left Margin Set (not Margin Release) lever as you move the carriage all the way to the left. Release the Margin Set Button or Lever. Now hold the Right Margin Set Button or Lever (not the Margin Release), and move the carriage all the way to the right while holding the Margin Set. Once the carriage is all the way to the right, release the Margin Set. Move the carriage to the place you want to set your left margin. Hit the Left Margin Set and then release. Move the carriage to where you want to set the right margin. Hit the Right Margin Set and release it. It gets confusing, but Margin Release does not set margins. Its sole purpose is only to bypass the margins. Hope this helps.

Check your margin settings in your printer set up.

Check you Page Setup andmargin set. Sounds like the page isn't set up properly. When you typing a document, go to the FILE then PAGE SETUP. Margins and Paper Layout.
Hope this helps. Bud

Could be as simply as the right print margin in the application you are using. Try printing a test page by right-clicking on the printer in Printers and Faxes in Control Panel and select Properties. If the test page prints ok then check the margins in the application you are using - usually File>Page Setup. The right margin could be set to 5.0 in instead of 0.5 in.

Hi there,
Have you try to Copy paste the content of Outlook to Word and then try to print.

As Outlook have lesser option to set for printing. And may not possess all the features to print it correctly.

Let me know if I can assist you further.
Regards
Ellin