PLEASE COULD YOU HELP ME GUYS MY CANON PIXIMA MP140 CANNOT EVEN PRINT OR EVEN DO ANYTHING
Following error codes i found
E2-2 No paper (ASF)
E3-3 Paper jam
E4 No ink
E5-5 The ink cartridges are not installed or a non-supported ink cartridge is installed ,
or the ink cartridges are not installed properly
E8 Waste ink absorber full, or platen waste ink absorber full
CANON MP140
Have replaced Black ink cartridge.
Do not want to print in colour yet still having E4 code. The colour ink is empty.
Can i still print in just B&W!!??!!
Also the start stop button.... i presume this is the black/white symbol 1st button... there are 3 in a row!
I'm from Indonesia (NOC Manado University of Tondano, North Sulawesi, thank's for u'r solution .... u have give the best for finishing my job this morning..... onces more .... big thank's and GBU Svenby :)
By: Iwan Kowureng
Press stop/reset for 5/10 secs after refilling the cartridge...
I refilled my canon mp140 cartridges but the printer just give me a error 5.
Cara Mereset Printer Canon MP145 & MP160 Agustus 23, 2008 Posted by gfirmansyah in Teknologi.
trackback
Canon MP160 , MP145
1) With the printer powered off but connected to a power source, press the Power button while pressing and holding
the Stop/ Reset button.
2) When the Power is lit, press the Stop/Reset button two times while pressing and holding the Power button.
3) When releasing the Power button and the Stop / Reset button (regardless of order), the printer will move into a
service mode. (Waiting for menu selection)
4) When the on/off lights in green, press the Stop/Reset button the specified number of time(s) according to the
function listed in the table below.(Each time the Stop/Reset button is pressed, the LED lights alternately in
orange and green, starting with orange.)note: press 4 times for waste ink counter reset.
The number of the Reset
button pressing
LED Function Remarks
0 time Green Power off
1 time Orange Service pattern print
2 times Green EEPROM print
3 times Orange EEPROM reset
4 times Green Waste ink counter reset
5) Unplug cable power. (for MP145 / MP150)
6) Turn Off Power. (for MP160)
Error Code :
E2-2 = No paper (ASF)
E3-3 = Paper jam
E4 = No ink
E5-5 = The ink cartridges are not installed or a non-supported inkcartridge is installed, or the ink cartridges are not installed properly
E8 = Waste ink absorber full, or platen waste ink absorber full
E9 = The connected digital camera / video camera does not support Camera Direct Printing
E14 = The Ink cartridges whose destination are wrong
E15 = Ink cartridge is not installed E16 - Ink remaining is unknown
E16 -E19 = Failed to scan head alignment sheet
E22 = Carriage error
E23 = Paper feed error
E24 = Purge unit error
E25 = ASF(cam) sensor error
E26 = Internal temperature rise error
E27 = Waste ink absorber full or platen waste ink absorber full
E28 = Ink cartridge temperature rise error -
E29 = EEPROM error
E33 = Paper feed position error
E35 15 = USB Host VBUD overcurrent error - USB
E37 17 = Abnormal motor driver error
E40 20 = Other hardware error
E42 22 = Scanner error
MERESET WASTE INK COUNTER PADA CANON MP160 DAN MP145
1. Matikan printer (kabel power masih tercolok), tekan dan tahan tombol STOP/RESET kemudian tekan tombol ON/OFF
2. Tahan tombol ON/OFF, tekan tombol STOP/RESET 2x
3. Lepaskan kedua tombol dan printer akan masuk ke SERVICE MODE
4. Printer akan charging
5. Setelah printer selesai charging, tekan tombol STOP/RESET 4x.
6. Setiap kali tombol STOP/RESET ditekan, lampu ON/OFF akan berubah warna hijau dan oranye.
7. Matikan printer dan cabut kabel POWER.
8. Hidupkan kembali printer
Kode Error Canon MP160 dan MP145
E2-2 = No paper (ASF)
E3-3 = Paper jam
E4 = No ink
E5-5 = The ink cartridges are not installed or a non-supported inkcartridge is installed, or the ink cartridges are not installed properly
E8 = Waste ink absorber full, or platen waste ink absorber full
E9 = The connected digital camera / video camera does not support Camera Direct Printing
E14 = The Ink cartridges whose destination are wrong
E15 = Ink cartridge is not installed E16 - Ink remaining is unknown
E16 -E19 = Failed to scan head alignment sheet
E22 = Carriage error
E23 = Paper feed error
E24 = Purge unit error
E25 = ASF(cam) sensor error
E26 = Internal temperature rise error
E27 = Waste ink absorber full or platen waste ink absorber full
E28 = Ink cartridge temperature rise error -
E29 = EEPROM error
E33 = Paper feed position error
E35 15 = USB Host VBUD overcurrent error - USB
E37 17 = Abnormal motor driver error
E40 20 = Other hardware error
E42 22 = Scanner error
Push Reset button for 5 seconds
76,215 views
Usually answered in minutes!
i CANNOT DO ANYTHING , I ONLY SEE E AND 4 ON MY SCREEN
My Canon MP140 printer keeps giving my error E-4, I know it means out of ink. But I have gotten the ink cartridges refilled becase the stores are always out of the ink. And I still get the error message. I've restarted reinstalled them over and over. How do I get it to go away?
I don't know how to solve this situation! I am in desperate need please! I need my printer to work!! I have mid years and I need to copy my notes! Please people any can help it's appreciated
i've re-filled the ink catridges but it still says 4E!!! what can I do?
mp140
I hav The same problem
Same Problem
I bought refills off ebay and cant get my printer to print at all.
my canon pixma 140 E7 what's that error?
I have this error message but I'm just trying to scan so why does it matter that there's currently now ink?
Black ink cartridge replace
Just give a call Cannon support (877-690-9305)
dial +61-1800-431-295 canon printer support number Australia to solve this problem instantly.
Want to know the information about common PCB design mistakes that you need to avoid? Read on to find the top 6 ones!
Blog:https://www.optimatech.net/knowledge-cen...
×