I need to know which one better , less paper jam ,easy to use\r\nand reliable:
KONICA MINOLTA bizhub 501
OR
Kyocera TASKAlfa 521i MFP Machine
OR
Xerox 5655
my needs : 50 ppm scan to email network printing Duplex
Monthly volume : about 20,000 -30,000
Thanks a lot for your help...
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Misfeed Error, or Timing Error. You need dealer service. This is a Professional Machine. The fuser only heats the toner to set it on the paper. It is nothing to do with jams.
Jun. 26, 2017 - Hi all I have the C0206 & C0208 when connecting the PC-410 (twin cassette) ... jonbonse is offline ... Konica C224 error C0206 & C0208 ...
Code: C0208; Description: Tray 4 Elevator Failure - The Lift-Up Sensor is not unblocked even after the set period of time has elapsed after the paper lift up ...
Missing: Mita. ' Must include: Mita.
The leading edge of paper is not turned ON (unblocked) the paper exit sensor (PS3) since the paper feeding is started.
Causes
• Transport motor (M1) • Fusing motor (M3) • Registration clutch (CL4) • Registration sensor (PS1) • Paper exit sensor (PS3) • Front side board (FRB) • MFP board (MFPB)
Please look the jam code, then only b easy to provide solution.
To check Jam code follow these steps.
UTILITY-METER COUNT
STOP 00 STOP 01
COUNTER
JAM HISTORY
Here you will find Jam code E.g J2202 like that.
www.fixyourownprinter.com/posts/40820
Aug 22, 2008 - Am working on a Magicolor 2300 DL that sometimes fails to lift the paper tray ... good afternoon I have a konica minolta bizhub c550 when I open the ... I'm no printer tech, but in most other lasers (HPs, etc) the paper tray lifts, .... It seemsthere is a "waste toner sensor" which only lets the printer print out a few ...
Konica Minolta paper jam adf scanner Questions & Answers ...
www.fixya.com > Forum > Tags > paper jam adf scanner
Question about bizhub 350 All-In-One Laser Printer ... Konica Minolta bizhub 250 jammed but no paper ... Good luck. ... ...paper is there if the switch is working the adfboard is fualty or the cable between the machine and adf broke from all the ...
Konica Minolta bizhub document feeder not working ...
DEAR fRIENDS NEED HELP TO FIX MY COPIER KONICA MINOLTA BIZHUB PRO C500 ERROR CODE C45-02 PLZ.
TeleFax: 966-12-65o3104, Mobile No. 00966-502835548 / 00966-565339421 / 00966-540556951 e-mail :- [email protected]
Is the thick 4 11 x 81/2? take the paper off the bypass tray, first send the job to the copier selecting the bypass tray the copier is going to beep telling you replenish paper in the bypass when you place the paper in the bypass make you follow the orientation of the paper on the copier screen.Might also want o replace the bypass tray roller set. If the Plain paper through Thick 3 work then you did not need to replace the main board. Are trying to duplex the paper????? When it jams where does the paper stop??
Please check the sensors and actuators ,open & close front door to reset nisfeed.Clarification Top feed = Automatic Document Feeder?If YES,please verify misfeed paper beetween coverplaten and feedbelt(Yellow).Is necessary disassembly the ADF.Good luck.You will find a little paper.
×