20 Most Recent Canon ImageClass D880 Copier Questions & Answers

0answers
0helpful
1answer

When I make a copy, there is a line about 2 inches

Clean the Scanner Glass well (there should be signs or some dirt) and the problem will be solved!
8/24/2013 10:03:40 PM • Canon ImageClass... • Answered on Aug 24, 2013
0helpful
2answers

ADF has something on it causing a stripe on all copies

Lift the document feeder and clean the narrow glass, (next to the glass where you place your originals). Documents are scanned across this glass when automatic feeder is used, thus a small piece of dirt becomes a line down the page.
8/15/2013 7:54:49 AM • Canon ImageClass... • Answered on Aug 15, 2013
0helpful
1answer

Doesn't print

i think power card OR mother board problem
2/26/2013 2:57:12 PM • Canon ImageClass... • Answered on Feb 26, 2013
0helpful
2answers

System error E000

Here's the definitive reset. It will work on the following models: ImageRunner 1200/1300, PC1060/1061/1080F, ImageClass D620/D660/D661/D680/D681
Press Additional Functions key
Press #
Press > to #7 Printer Function
Press Set
Press > to #4 Printer Reset
Press Set
Press <
Unplug printer and repower it.
8/7/2012 5:15:26 PM • Canon ImageClass... • Answered on Aug 07, 2012
0helpful
1answer

Paper is crinkled when exiting machine.

Hello.Have a look at your paper first.it could be foged or damped.Otherwise you will need to replace the Hot roller, pressure roller , thermoster and bushes
6/14/2011 1:54:06 PM • Canon ImageClass... • Answered on Jun 14, 2011
0helpful
1answer

A customer's ImageClass D880 fax/printer's

I was ever have that problem.
the solution is I moving slide the scanner section more hard then usually.
and I think that is the lock of scanner not fit.
6/1/2011 10:28:45 PM • Canon ImageClass... • Answered on Jun 01, 2011
0helpful
1answer

Supply rec. paper cassete thats all

assure the replace of paper cassete.
if still like that.
remove the paper cassete
find the sensor cassete in side
and you clean up.
5/14/2011 4:06:40 AM • Canon ImageClass... • Answered on May 14, 2011
0helpful
1answer

Copier says System Error E000. What do I do to

additional functions # to enter diags. do #7 printer reset. if it comes back fuser needs replaced. i have them and they are serial # specific
[email protected]
3/7/2011 9:19:42 PM • Canon ImageClass... • Answered on Mar 07, 2011
0helpful
1answer

What are the disadvantages of using compatible

Not many as I use them for all of my service customers. They key is using a good source for the cartridges. There are cartridge "remanufacturers" who will sometimes just refill the toner chamber and do nothing else to the cartridge. This is where people run into problems and develop a bad attitude towards remanufactured cartridges. A proper remanufactured cartridge will have a new drum, wiper blade, seal etc. installed EVERY time thus making it a much more dependable unit. On your machine what I recommend is check with local cartridge suppliers if available and get a cartridge there. Then once you open it up and before you pull the seal tape out of it, turn it over and slide open the drum protection "gate" and look at the drum. It should be clean, shiny and obviously look like new. If it has wear lines or any other obvious signs of wear then return it and show them that this cartridge has an old drum. I would not give them a second chance.
If you need an online vendor than I would suggest PrecisionRoller.com
They have your cartridge for $39.00 and their part number is V3920.
I have had very good luck with all of the cartridges I get from them. They also offer free shipping on an order of just $75 or more.
Good Luck and Thank You for using Fixya.
WheatlandServices
11/13/2010 2:17:09 PM • Canon ImageClass... • Answered on Nov 13, 2010
0helpful
1answer

I have an error code = SYSTEM ERROR E000

fuser error replace it they are serial # specific
11/12/2010 1:18:38 AM • Canon ImageClass... • Answered on Nov 12, 2010
0helpful
1answer

I have a Cannon D880 an Error is showing E000. I

hi; its a fusing unit problem check the heater it can be a bad contact
10/20/2010 9:36:56 PM • Canon ImageClass... • Answered on Oct 20, 2010
0helpful
2answers

We have a Canon imageClass D860. It came up with

Here's the definitive reset. It will work on the following models: ImageRunner 1200/1300/1310,1330,1370,1630,1670, PC1060/1061/1080F, ImageClass D620/D660/D661/D680/D681/D880

Press Additional Functions key
Press #
Press > to #7 Printer Function
Press Set
Press > to #4 Printer Reset
Press Set
Press Unplug printer and repower it.
10/11/2010 5:32:55 PM • Canon ImageClass... • Answered on Oct 11, 2010
0helpful
1answer

Some of the springs came

if you found a spring from the fuser and a flat blade like piece of black plastic this would be a detach finger and tension spring all fusers have the they help prevent the paper from rolling up on the fuser roller. fusers have either 5 or 6 depending on the model.they will funtion muinus one of these. if you get regular paper jams in the fuser of if they start replace fuser
10/4/2010 5:18:43 AM • Canon ImageClass... • Answered on Oct 04, 2010
0helpful
1answer

How do you clean the barrel of a Cannon D880

Did you get a label stuck on it???? I would say you are going to have to replace the cartridge. The damage is done.....
9/22/2010 3:09:05 AM • Canon ImageClass... • Answered on Sep 22, 2010
0helpful
1answer

I need to know which one better , less paper jam

TASK ALFA 521 I THE BETTER
9/1/2010 10:06:07 PM • Canon ImageClass... • Answered on Sep 01, 2010
Not finding what you are looking for?
Canon ImageClass D880 Copier Logo

86 questions posted

Ask a Question

Usually answered in minutes!

Top Canon Office Equipment & Supplies Experts

old marine
old marine

Level 3 Expert

2415 Answers

Cindy Wells

Level 3 Expert

6555 Answers

Marvin
Marvin

Level 3 Expert

85241 Answers

Are you a Canon Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Canon Office Equipment & Supplies

  • Canon Office Equipment & Supplies

Most Popular Question

error code e003 fix myself

  • Office Equipment & Supplies
Loading...