ERROR 5010 CANON PIXMA MP460 JUST RECIEVED USED IN MAIL. TURNED ON. ON/OFF& ALARM FLASHING. CODE 5010 ON SCREEN

Check the manual that came with it for the answer to the codes.

Hi

Thanks for using FixYa. To reset the Printer turn it off and remove the power plug from the outlet. About fifteen minutes later, plug it in again and turn the printer on. If still the issue the printer is facing with persists, then you need to follow these steps as the 5010 error relates to the drivers and you need to download the latest drivers compatible with operating system and model of printer.

Uninstall any previous drivers for the printer and to install the printer, unplug the printer completely, restart your computer. Install the drivers using the file you downloaded from canon, do not attach the printer to the computer, or power on until you are told to do so. You can download the drivers from the following link of Canon---

Printer Drivers for Canon Pixma MP460


Please do rate the solution and revert for further assistance.


Thanks
Rylee

The 5010 error is a scanner error, the lamp is dead, or the scan assembly is stuck. There are no parts, only whole scanner assembly replacement. You get a one year warranty with Canon, after that it could be a $200.00 repair.

Hello, The error 5010 refers to a scanner issue, make sure all the connectors are seated and all flat cables running to the scanner unit are firmly seated, turn printer back on and the error should clear. I hope this helps.

Call Canon technical support.
Dial 1-866-261-9362, Monday - Friday 10:00 a.m. - 10:00 p.m. ET (excluding holidays).
See also a previous related question here! (a scanner issue)
http://www.fixya.com/support/t1232529-error_code_5010_cannon_mp460_printer

Canon PIXMA MP460 error code 5010

phone Canon 800#. lay a guilt trip on them. Or google the problem.

1. Press ON/OFF switch to reset the multifunction device 2. Removing paper jams MP450 / MP460 3. The MP460 may require repair

errore code 5010

comme caz.... si po agiustare sta mer...????