20 Most Recent Canon PIXMA MP510 All-In-One InkJet Printer Questions & Answers

The error in Canon Printer Error Code B200 indicates a defective print head. A print head is an element that actually allocates the ink onto the paper from the cartridges, which ensures that it is one of the most critical aspects of the printer as a whole. Canon Printer Error Code B200, which can signify a hugely damaging system error, is one of the most feared.

Try these fixes before you go replacing your entire device. Follow this step given below.

1. Restore the doubtful cartridges
2. Extract and clean your printhead
3. Reseat your printhead
4. Check for obstructions

Solution - Canon Printer Error Code B200

Canon PIXMA ... | Answered on Sep 25, 2020

Canon Printer Error B200 has tried Canon printer users quite frequently. However, the good point is that there is a method that you can follow for managing and repairing this error.

A reliable guide for troubleshooting can change the user's fix the Error Code B200.

Easy & Simple ways to Resolve Canon Printer Error B200.

1.Re-boot printer. Un-plug your printer and give it cut for at least 30 minutes.

2. Eliminate any blocking. There's a chance something is interrupting the joint to your printer head.

3. Cleaned printer head applying your Computer printer maintenance options.

To Resolve Canon Error B200, you want to join with Printer Error Support specialists.

Full Blog - Canon Printer Error B200


Canon PIXMA ... | Answered on Aug 28, 2020

Helo, found on web. Good Luck :0)

The error code is standard for many of the late model MPxxx printers. The B200 error is "Printhead Temperature exceeded", What this means that while you were printing some document, either one or more of the printhead ink wells ran out of ink and the printing continued. Printhing without ink in the wells will OVERHEAT THE PRINTHEAD NOZZLES and can potentially burn the out. The printer has a built in temperature sensor to detect the ambient temperature and to monitor the temperature of the head. This data is always collected and monitored and saved in the EEprom data and the Service Test print data.

If the error will not go away once you have unplugged the priner for at least 5 minutes, then there is the possibility that you have already burnt out the head. Remove the printhead and use a 5x magnification glass to look VERY CLOSE at all of the nozzles to see if you can detect any possible burnt out nozzle.

It many come down to need a new printhead.

Canon PIXMA ... | Answered on Jun 02, 2020

After getting out my instruction book and further assessing the problem, was able to remove a small corner of the paper and then the printer ejected the remainder.

Canon PIXMA ... | Answered on Mar 07, 2019

in the printer set up ( normally in the print section , change the color to black and white , make default and ok

Canon PIXMA ... | Answered on Jan 01, 2018

Go to a program you can print out of, click 'file' then 'print' then 'printer properties' then 'maintenance' and you'll find 'clean' and 'deep clean' buttons there.

Canon PIXMA ... | Answered on Mar 02, 2015

The error 6800 means you need to replace the logic board.This is the code of the logic board (QM2-3827).If i have been useful please give me a vote :)

Canon PIXMA ... | Answered on Oct 20, 2014

Whilst the obvious answer is to plug it in, I think that there are some words missing from the question between "printer" and "it" - can you clarify?

Canon PIXMA ... | Answered on Aug 08, 2014

I would suggest switching everything off, unplugging and starting all over again, it may be that simple.
Plan B :Un-install the driver and reinstall.
Plan C :Check that the MP510 is the default printer via Control Panel/Hardware & Sound/Printers. Click printer icon and then right click or use task bar.
The flashing lights indicate a fault on the printer itself so check for paper jams, ink cartridges in place etc.

Canon PIXMA ... | Answered on Jun 28, 2014

Operate the scanner from the computer not the printer.
Have you loaded the MP Navigator progam from the cd supplied with the printer?
If not, do that first and then follow the steps below.
Double click MP Navigator icon on desktop.
Choose "custom scan with one click "
Save to pc. (" attach to email "only works on windows mail)
Open saved location and rename.
Write your email & click on insert drop down box
Click on "pictures inline "
Open pictures.
Open MP Navigator folder
Choose scanned item by name
Click on open box
Scan will appear under the text in your email.

Canon PIXMA ... | Answered on May 31, 2014

Check you power cord and your outlets too.

Canon PIXMA ... | Answered on Apr 25, 2014

Not finding what you are looking for?
Canon PIXMA  MP510 All-In-One InkJet Printer Logo

426 questions posted

Ask a Question

Usually answered in minutes!

Top Canon Office Equipment & Supplies Experts

old marine
old marine

Level 3 Expert

2316 Answers

Muntejaya Ginting
Muntejaya Ginting

Level 3 Expert

10422 Answers

Cindy Wells

Level 3 Expert

6198 Answers

Are you a Canon Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular


  • PIXMA Canon

Most Popular Question

get scanner attach e mail

  • Office Equipment & Supplies