Question about Canon LC-3175 Laser Fax

Open Question

Load fax numbers to memory - Canon LC-3175 Laser Fax

Posted by Anonymous on

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

How do I send a fax?

Are you set up with the phone company? you need to set up your fax machine by putting the other persons fax number in its memory,then you put in the fax number to where its going and . you load your paper you're going to fax and send! it'll come out just like a printer when its done.
1helpful
1answer

Need to print a fax in memory, machine was turned off and unplugged

It may be too late to print the faxes if your printer was unplugged. But you can try:



reprint the faxes in memory

Your HP OfficeJet can store a limited number of fax pages in its memory, with

the number of pages depending on the model you purchased. When your

HP OfficeJet runs out of memory to store faxes, it will not receive any more fax

calls until the stored faxes are printed.

Reprint Faxes in Memory enables you to reprint a fax stored in memory. For

example, if your print cartridge runs out of ink or paper becomes jammed when

printing a fax. This option prints all faxes in memory; press Cancel to stop

printing faxes you do not need.

1 Press Menu.

2 Press 2, then press 3.

This selects the Fax Functions menu, then selects the Reprint Faxes in
Memory
option. The faxes are printed from memory.

If I could be of further assistance, let me know. If this helps or solves the issue, please rate it and give a testimonial for my response

Thanks, Joe



I’m happy to assist further over the phone at https://www.6ya.com/expert/joe_8b8c2cd6ce148309

0helpful
1answer

Insstructions for sending a Fax on a Brother

You can find the entire user manual by clicking here:
http://www.brother-usa.com/ModelDocuments/Consumer/Users%20Manual/UM_MFC_240C_EN_249.PDF

Or, here are the instructions for sending a fax:

Entering Fax mode 5

To enter fax mode, press (Fax), and
the key will glow green.

The LCD will show the new job number and
the memory available.The number of pages
you can scan into the memory will vary
depending on the data that is printed on them.

Faxing from the ADF 5
a Make sure you are in Fax mode .
b Put the document face down in the ADF.
c Dial the fax number using the dial pad.
d Press Black Start or Color Start.
The machine starts scanning the
document.

Note
• To cancel, press Stop/Exit.
• If the memory is full, the fax will be sent in
real time.

Faxing from the scanner glass5
You can use the scanner glass to fax pages
of a book one at a time. The documents can
be up to letter or A4 size.

You cannot send multiple pages for color
faxes.



Make sure you are in Fax mode .

Load your document on the scanner
glass.

Dial the fax number.

Press Black Start or Color Start.
If you press Black Start, the
machine starts scanning the first
page. Go to step e.

If you press Color Start, the
machine starts sending the
document.

Do one of the following:
To send a single page, press 2 to
choose No. (or press Black Start
again).
To send more than one page, press
1 to choose Yes and go to step f.

Put the next page on the scanner glass.

Press OK.
starts scanning the page.

.
0helpful
1answer

I need to know how to send a Broadcast fax to multiple numbers

This is right from the manual:
You can use the Multiple Send feature, which allows you to send a fax to
multiple locations. Originals are automatically stored in memory and sent
to a remote station. After transmission, the originals are automatically
erased from memory.
1 Press Fax.
2 Load originals face up into the ADF, or place a single original face
down on the scanner glass.
For details about loading an original, see page 5.1.
3 Adjust the document resolution and darkness to suit your fax needs.
See page 9.1.
4 Press Menu until Fax Feature appears on the bottom line of the
display and press OK.
5 Press the Scroll buttons until Multi Send appears and press OK.
6 Enter the number of the first receiving fax machine and press OK.
You can use speed buttons, speed dial numbers, or group dial
numbers. For details, see page 10.2.
7 Enter the second fax number and press OK.
The display asks you to enter another fax number to send the
document.
8 To enter more fax numbers, press OK when Yes appears and
repeat steps 6 and 7. You can add up to 209 destinations.
Note
You cannot use group dial numbers for another fax number.
9 When you have finished entering fax numbers, select No at the
Another No.? prompt and press OK or Start.
The original is scanned into memory before transmission. The
display shows memory capacity and the number of pages being
stored in memory.
10 If an original is placed on the scanner glass, select Yes to add
another pages. Load another original and press OK.
When you have finished, select No at the Another Page? prompt.
The machine begins sending the fax to the numbers you entered in
the order in which you entered them.

Manual - see page 54
1helpful
1answer

Faxing to several numbers

Sending Broadcasting Faxes:

Using the BROADCASTING BUTTON on the control panel you can use the broadcasting fax feature. 1. Load the document(s) face down into the ADF. 2. Adjust the document resolution to suit your fax needs.Press BROADCASTING on the control panel.4. Enter the number of the remote machine using the number keypad. 5. Press enter to confirm the number.The display ask you to enter another fax number to send the document. 6. To enter more fax numbers, press 1 to select "YES" and repeat steps 4 and 5. You can add up to 10 destinations. NOTE: You cannot use group dial numbers for another fax number. 7. When you finish entering fax numbers, press 2 to select "NO" at a "ANOTHER NO" prompt.

The document is scanned into memory before transmission. The display shows the memory capacity and the number of pages being stored in the memory.
The machine begins sending the document in order of the numbers you entered..Hope this helps
0helpful
1answer

Put in number press the green button to send the fax and it comes up with Memory Set Doc flashing but wont send the fax.

try sending manually


to do so


load a document---->press hook----->dial the number----->when you hear a fax tone press start.

0helpful
2answers

Says load paper recv'd in memory

I had same problem. I put in a big bunch of paper and then took out about half of it and it suddenly worked. Also try opening the lid and then closing.
0helpful
1answer

Delete fax numbers from speed dial memory

clear the fax memory from service setup, will resolve the problem happy faxing omnipresent.
0helpful
1answer

Printing same page

try this make sure that receive reduction is switched on. You could load the paper tray up and just let it print as may have been a communication problem from RTI memory. Being Richo machine you should be able to reset the memory but this will get rid of all your stored numbers. But it will reset the machine so if you have a corrupted memory issue this will get rid of it.


Hope this helps you
Thanks J
Not finding what you are looking for?
Canon LC-3175 Laser Fax Logo

Related Topics:

19 views

Ask a Question

Usually answered in minutes!

Top Canon Office Equipment & Supplies Experts

old marine
old marine

Level 3 Expert

2383 Answers

Ekse

Level 3 Expert

13435 Answers

Cindy Wells

Level 3 Expert

6370 Answers

Are you a Canon Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...