20 Most Recent
Samsung SCX 4521F All-In-One Laser Printer Questions & Answers
My samsung printer is not picking up the sheets of
It could be a dirty pickup roller in printer. Found following advice from Samsung:
Printer will not feed the paper depends on following possibility.
- Paper Type:
- If surface of the paper is too smooth, pick-up roller will not feed the paper.
- In such case, try with different type of paper.
- Pick-up Roller:
- If the rubber roller is worn out, it will not feed the paper from the tray. There is not enough friction to feed the paper.
- Pull the paper tray out and clean the rubber roller.
Printer/Paper Jam Brother MFC
Well I fixed it!!! Here's what I did. You see this picture of the cover opened? Where the arrow's pointing is the home position of the printer head. Under there I found a scrap piece of paper! Here's exactly what I did. When I got home I decided to plug it in to see if it would work, but it made the same noise and showed the same error message as before. I opened the cover as shown above. This resets it, and it says "close cover". I closed it, and AS it started to go through its routine I OPENED IT again, and I could see the printer head moving back and forth. At this point I used a flashlight to see where the home position of the Head was, and that's where I found the scrap of paper!
I unplugged it for safety and was able to remove the scrap with my fingers.
By your descriptions, referring to the other users, you just might have the same problem.
Samsung SCX-4521 "Paper Jam 2" won't clear
I had this problem too. For me the answer turned out to be the paper sensor in the back part of the machine, behind the little back door just under the top part of the machine. This sensor hangs down from a thin rod that runs across the width of the machine, and is held in place by a small spring that encircles the same rod that supports the finger. The finger had apparently gotten moved so the spring was dislodged from its proper place. I was able to rotate it around the rod with my finger & get the spring moved back to where it should be. This seems to have cleared the problem--I'm keeping my fingers crossed.
Error out of range
dear Irfan khan,
pls. enter the date format as MM/DD/YYYY suppose it as 20th June 2014 enter as 06202014 ok....
if it not solved pls. write me....
I want samsung smarthru scanner
go to samsung web page and write your printer model in the little window then download the newest drivers from the download page, you will need 1. driver for the printer, 2. driver for the scanner, 3. driver for the fax and last samsung Dr. Printer
Setup
Go to Control panel>>Installed printers and delete your samsung from installed printer list.
After deleting, unplug printer cable, restart computer and reinstall the software from disk.
If you do not have disk you can download software and manual from here
: download center SAMSUNG
I wnt 2 install samsung
Go to the Samsung support website & download the correct driver for your printer & operating system.
http://www.samsung.com/mea_en/support/detail/supportPrdDetail.do?menu=SP01&prd_ia_cd=06010300&prd_mdl_cd=&prd_mdl_name=SCX-4521F
I have a mac os x version 10.6.6, and a samsung
Here are the drivers:
Printer: http://downloadcenter.samsung.com/content/DR/200912/20091217112644875/SCX-4x21.zip
Scanner: http://downloadcenter.samsung.com/content/DR/200912/20091217112644875/Samsung_SCX-4x21_Scanner.zip
I hope you got the answer. :)
How i can install printer driver samsung scx 4521f
Just install the CD.
If you can't find it, download from http://www.samsung.com/tr/support/detail/supportPrdDetail.do?menu=SP01&prd_ia_cd=06010300&prd_mdl_cd=SCX-4521F%2FSTS&prd_mdl_name=SCX-4521F&prd_ia_sub_class_cd=P
You don't need smart panel for printing so you may go ahead and download "print driver" only
Samsung scaner driver
The driver can be found on the Samsung website.
http://www.samsung.com/us/support/downloads/SCX-4521F
Not finding what you are looking for?
Well I fixed it!!! Here's what I did. You see this picture of the cover opened? Where the arrow's pointing is the home position of the printer head. Under there I found a scrap piece of paper! Here's exactly what I did. When I got home I decided to plug it in to see if it would work, but it made the same noise and showed the same error message as before. I opened the cover as shown above. This resets it, and it says "close cover". I closed it, and AS it started to go through its routine I OPENED IT again, and I could see the printer head moving back and forth. At this point I used a flashlight to see where the home position of the Head was, and that's where I found the scrap of paper! 
