20 Most Recent Logitech Cordless MX Duo 967300-0403 Keyboard - Page 2 Questions & Answers

It sounds like you are trying to use the same formatting settings on your new Logitech keyboard that you had on your old Logitech keyboard, but the formatting button is not present on the new keyboard. To add the formatting button to your new Logitech keyboard, you will need to do the following:

1. Open the Logitech Options software. This software allows you to customize the settings and functionality of your Logitech keyboard.
2. Select the "Buttons" tab. This will allow you to customize the buttons on your keyboard.
3. Find the formatting button that you want to add. Depending on the model of your keyboard, you may have the option to add a variety of formatting buttons, such as bold, italic, and underline.
4. Assign a function to the button. To add the formatting button to your keyboard, you will need to assign a function to it. Click on the button and then select the formatting function that you want to use.
5. Save the changes. Once you have added the formatting button and assigned a function to it, click the "Apply" button to save the changes.

I hope this helps! Let me know if you have any other questions.

Unfortunately, Logitech does not offer any Bluetooth support for the Logitech Y-RAJ56A keyboard. The keyboard is designed to be used with a wired connection, and it does not have any Bluetooth capabilities. Yes, you can use a Bluetooth adapter to connect your Logitech Y-RAJ56A keyboard to a Bluetooth enabled device. However, you should bear in mind that the keyboard will not have any additional features or support when connected via Bluetooth. So you will need to purchase a Bluetooth adapter. The Kinivo BTD-400 Bluetooth 4.0 USB Adapter is a good choice and is compatible with most versions of Windows and Mac. P.S. BTD400 Advisory A recent update to Windows is preventing the BTD-400 from locating drivers automatically when plugged in for the first time. Please visit the article below to set up the BTD-400 Bluetooth Adapter for the first time. BTD400 Driver Installation

Send it back to Logitech for repair under warranty. https://www.logitech.com/assets/49301/3/ultrathin-keyboard-cover-i5-quick-start-guide.pdf ..

it you forget something that must install on your PC to operate your Mouse G502. Just get logitech g502 software first, then install it to your PC

All the information is here https://support.logi.com/hc/en-us/articles/360024847013--Downloads-X52-Space-Flight-H-O-T-A-S- Manual https://www.logitech.com/assets/65328/2/x52-hotas.pdf ..

Most likely it's a programming thing but it could be you have a loose wire... Never no.. Mite try getting a cheap pair try to see if the same problem occurs.. Thanks good luck

yes.

google Logitech M-R0013 receiver for more info they start at $5.00

Try Logitech but don't hold your breath because win7 is obsolete and no longer supported.

It should be on the box it came in, as a barcode and text. or you can sometimes download the computer software and it will identify it in Properties https://support.logi.com/hc/en-us/articles/360024361233 Or you can ask them direct https://support.logi.com/hc/en-us/requests/new?ticket_form_id=360000621393 Here is you manual, just because I came across it. https://www.logitech.com/assets/38467/3/hd-webcam-c615-gsw.pdf ..

Edited my information out. Take Larry Ng's advice.

you are going have to use the tv to search the internet for the logitech website try install the into the memory storage area in the tv or you mite have put the software or program installation software on a flash drive and plug it into usb plug on the tv. if that fail i have another idea try itunes see if they have generic drive that will work with the keyboard. go to logitech website or tv website and post the same question to the forum members for help. good luck rod

this is in resonse to malware high jacker. the OP mixed 2 wireless mice and keyboard/ mouse technologies, this will never work 1: bad batteries 2: use the drives form logitech or Microsoft only. 3: use the correct receiver, (they have 2 mixed and is dead to rights WRONG that) 4: RTM read the manual. dah"? the mouse is 2011 the keyboard 2400 has mouse too and is 2006 made the cure is kick the old keboard to the curb and use any wired keyboard and then connect only the receiver from that new 2011 mouse. it will plug and play. ok. (but is VISTA so gee, maybe not) my guess is old 2400 mouse died and bought the wrong mouse, that well never work with the 2400 parts ever.(mixed technology wirless) Logitech m325

get a new one

Probably time for a new one. Logitech aren't supporting it. https://support.logi.com/hc/en-us/articles/360024361233 Or you can risk a site like this. http://semantic.gs/logitech_precision_lens_f2~4_driver_v2_download Did you try the Drivers that come with Windows? Operating System information is useful in such questions :>) ..

As you now know, water/liquid and electricity do not bode together well. Purchase a new keyboard, that one is scrap.

There are tips and videos here to disassemble and clean. https://www.google.com/search?q=fix+Logitech+TrackMan+Wheel ..

It sounds like the mouse broke when you dropped it. You might want to check the warranty.

All the information necessary to charge or replace the two AA batteries is available in the first page of this Google search: https://www.google.com/search?client=firefox-b-1-d&q=logitech+folio+keyboard+battery+

See on this link, it must be helpful:
https://www.google.com/search?client=ms-android-huawei-rev1&sxsrf=ALeKk03AiYA1E1W_FNVOZs9QkCDPy5nwYA%3A1599463346050&ei=st9VX5m_AoCajLsPm5aAwAM&q=logitech+trackman+assembly+instructions&oq=logitech+trackman+assembly&gs_lcp=ChNtb2JpbGUtZ3dzLXdpei1zZXJwEAEYADIFCCEQoAE6BAgjECc6BQgAEMsBOgcIABAUEIcCOgcIABAKEMsBOgYIABAWEB46CAgAEBYQChAeOgQIABANOgYIABANEB46CAghEBYQHRAeOgQIIRAVUNToAViy4QJg6-8CaABwAHgAgAHLAYgBmhSSAQYwLjE2LjGYAQCgAQHAAQE&sclient=mobile-gws-wiz-serp#