Philips HTS3400/37 System "fuse" Questions

...tower speakers That is the standby mode but if its not kicking out of standby mode it could be a fuse issue The T300 uses a 2.5A fuse. To replace the fuse: 1. Unplug the AC cord from the AC power ...

...fact, this is a common problem with this model Home Theater In a Box (HTIB). The issue truly is the fuse. All you have to do is take the cover off and replace the fuse. There are approximately 8 ...

My JVC THM303 will not work at all. took it apart to see if there was a blown fuse and the fuse is blown but do not know where to get on. The fuse says 51MS on one end and 125V1.6A on other You need a

Can't turn the unit on. Pushing the Standby-on does nothing Open unit and look for fuse inside. If you have a multimeter check the fuse for continuity. If you do not have a multimeter then just ...

...to Install to bypass the CN 501 Socket I would wire in an on/off toggle switch just AFTER the fuse that tends to blow out. Its the fuse discussed it another post here on fixay. Currently you

If There is no power at the fuse but when I remove the fuse i have power at the contacts could the fuse be blown,and where can I find one to replace it? At harbor freight, purchase a 3 dollar volt ...

the time delay fuse blew...I need to replace it but list the fuse I jus realised you both think I'm talking about the fuse on the plug...I was refering to the fuse inside the stereo, I had it with me ...

Getting to fuse I seem to have blown a 6A fuse in my mixing board. I took out the 2 screws in the back of the mixer, and all I got was a sealed black unit that says 6A fuse? Is the whole unit the fuse

My sony receiver tuner wont turn on. It was working fine yesterday now it wont power up. The fuse near the plug wire inside is good. Any suggestions Fuses almost never go bad something causes them to ...