Philips HTS3400/37 System "power fuse" Questions

...might be a glass fuse in the power supply inside the unit if not then there will be a soldered in fuse called a wickman fuse you will need a mulitmeter to test this i hope this helps regards ...

...power on at all. Thought it might be a fuse. Opened it up and sure enough I found a blown fuse.( 10amp 250 volt ceramic ) Would this be the cause? I am having problems finding a new fuse. You can try ...

...fuse. If none of these work then it's probably a power supply issue. If the power supply isn't grounding right, this could be causing the system to overload and blow a fuse. The only way to fix this ...

...power need access to fuse in subwoofer check inside for a blown fuse.also there may be a problem with the board it's self.check to see if youre getting power through the cord and then go from ...

fuse where the power comes in and went to Radio Shack. They have a T1AL250V fuse pack that is a 1 amp, 250 volt, 5 X 20 mm SLOW BLOW glass fuse which is a better fuse for this common problem. Their RS

fuse where the power comes in and went to Radio Shack. They have a T1AL250V fuse pack that is a 1 amp, 250 volt, 5 X 20 mm SLOW BLOW glass fuse which is a better fuse for this common problem. Their RS

...fuse inside the unit but still ...no power..nothing? last few days ago..some one advice me to chaeck the unit if there is s fuse inside..I did...i find fused..i change already.but still the unit is ...

fuse i have power at the contacts could the fuse be blown,and where can I find one to replace it? At harbor freight, purchase a 3 dollar volt meter. Use it on "ohm" setting to confirm that the fuse is

...fuse inside the cap, replace the fuse and cap in the power connector (see diagram 5). 6. Connect the AC power cord to the speaker and raise it upright. 7. Connect the power cord to an AC power ...

...fuse and still no power - any suggestions ???? These unit have an internal fuse. This will mean removing the power lead, opening the case and replacing the fuse. Probably best to have a professional ...