What does maintenance code DC mean on a Sharp MX2600N

Hi do U mean H5-01 if so clear paper jam put it in Copy mode press on the keyboard. P * C * 14. CLICK EXECUTE and press Yes then press the COPY TAB IT should reset. Good luck

try reloading the firmware
http://www.copytechnet.com/forums/sharp/38099-annoying-error-l4-04-mx2600n.html

Hi,
I assume you have a C4-** code displayed.
The PTC unit is failing, if you turn the copier off & on then this will reset the machine. If the error is still there then the PTC will probably have failed & will need replacing.
Hope this helps.
Dave.

Search Results

SHARP MX 2600N ERROR CODES Trouble Codes

https://www.sosnfl.com/sharp-mx-2600n-error-codes/
SHARP MX 2600N ERROR CODES trouble codes C1 10 C1 14 C4 00 E7 03 E7 10 E711 E7 ... Wait until the panel has gone dark and any flashing buttons have stopped flashing. ... A0 11 FIRMWARE VERSION INCONSISTENCY (MFP-PCU).

[PDF]Sharp MX-M350N Trouble Error Codes - OlsonBros

olsonbros.com/sharp/.../pdf.../trbl-mxm350n_m350u_m450n_m450u.pd...
MX-M350/M450 N/U TROUBLE CODES 11 - 1. [11] TROUBLE CODES. 1. General. When a trouble occurs in the machine or when the life of a con- sumable part ...

[PDF]Sharp MX-3500N Trouble Error Codes - OlsonBros

olsonbros.com/sharp/support/.../trbl-mx3500n_3501n_4500n_4501n.pd...
MX3500N SELF DIAG AND TROUBLE CODE 8 - 1 ... part has reached .... 11: When detected during other than a job, the operation is enabled in other than the ...

Error Codes > Sharp > MX2600N - Printcopy.info

This is a scheduled maintenance programmed into all of these machines. It pops up when the machine crosses a certain "milage." If your machine is still making nice copies and prints it's nothing to worry about.


Copier Collin Houston TX Copier and Imaging Expert

image cartridge cyan need to be replaced

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

press program,*,clear,enter 14 press start then turn machine off and then back on.

Here's a link to a site that has the user manual. It's free to download, but you'll need Adobe or Nitro PDF reader to open it. I found the instructions for the same thing for my copier in its' manual. Good luck!

Decode error trouble: Compression
decode error (A compression file cannot
decompressed.)
1) Check the installing state of the PWB. (PCI bus)
2) When an error occurs during a FAX job, check
the installation of the FAX PWB. In the other
cases, check the installation of the MFPcnt PWB
and HDD.
3) Replace the MFPcnt PWB.

VK = 100,000 pages printed on the developer counter or 715,000 revolutions of the developer unit (as mixing can occur even when pages are not being printed). Developer can break down over time and or the seals can be damaged - so service by a technician is indicated. If maintenance was recently performed and the developer replaced then the counter needs to be reset.