Sharp Office Equipment & Supplies - Recent Questions, Troubleshooting & Support


Depends on which sensor you think may have failed.

Sharp Office... • Answered on Jun 06, 2021


That doesn't look like a Cellphone! Picture graphic looks like a photocopier? Presumably 'Are' is supposed to be 'Our', but no one knows what a 620 is? Google thinks it is a Wire Tracer unit!PLEASE, FULLmake model (what it is)in all questions and put it in the correct category.AHA, this is a Sharp AR-6020Orange Bang out triangle can be anything. Remove paper trays, remove toner, open all the doors, and look for paper misfeeds. Disconnect the power for 30 seconds. Replace everything and connect power.https://www.google.com/search?q=Sharp+AR-6020+copier+error+codes..

Sharp Office... • Answered on May 28, 2021


To use the power, you use the y to the x key, above the EXP key. To enter 2 to the power of 4, you enter 2 hit the y to the x key and enter 4 and hit enter. To use percent function, you enter the percent key after the number. To calculate Interest, where Interest = Principal x Interest x Time. For example, if the principal is $1,000, the interest rate is 8%, and time/term is 4 years, we would enter 1000 x 8 Percent x 4. When the8 is entered followed by the percent key, it should turn into 0.08. Good luck, Paul http://www.sharp-world.com/contents/calculator/support/guidebook/pdf/Operation_Guide_EL-531W_ser.pdf

Sharp el-531x... • Answered on May 22, 2021


How to reset meter reading counter;
a. in the operation panel ,press * ,interrupt, CA, interrupt keys.Display must go off.
b. enter 84 and press copy key. 000,000 will flash in the display
The copier meter reading is now reset to 0.

Sharp AR-5316... • Answered on May 01, 2021


You need the FULL Software Package, not just the Windows Driver. Plug and Play is unlikely to work. It is here; MFPs - MX-2610 - Drivers and Utilities https://business.sharpusa.com/Product-Downloads ..

Sharp Mx-2610n... • Answered on Apr 21, 2021


First try removing the fax telephone line, then remove the power plug for 5 minutes. Plug in the power and reconnect the fax line. If that fails, System Reset https://www.google.com/search?q=sharp+ar-m201+factory+reset ..

Sharp Office... • Answered on Apr 21, 2021


The EL-501X doesn't really work with fractions. You can always enter a fraction as a quotient. For example, you can enter 1/2 as 1 / 2, but you'll get 0.5.

Sharp Shar... • Answered on Mar 24, 2021


C4-30 is a transfer corona wire issue. May be shorted out due to dust and carpet fibers. Try spraying it with canned air to clear out what may be shorting it out Good luck !

Sharp Office... • Answered on Mar 17, 2021


Just had this EXACT problem on a Sharp EL-9200C. I got the down arrow to go away and then the calculator functioned like normal. Here's how: I got a ball point pen and rapidly activated the reset button on the back, then rapidly pressing the CL key... probably about 45-50 times, but eventually it cleared all the memory out and the calc was able to boot up. This was after replacing the batteries multiple times and trying every key and every 2ndF key. I feel like the master of the universe now!

Sharp El-9200c... • Answered on Mar 13, 2021


Ensure you are in COPY mode
press # * C * ( one after the other, fairly quickly)
when the screen changes enter the number 14 on the keypad
press the B&W start button
press 1 for Yes when the question displays
press thw CA button
machine will re-boot and fault should clear. If it doesnt you need a service engineer. This is a fuser temperature fault

Sharp MX-2300N... • Answered on Mar 09, 2021


Once you open up the clear plastic cover, there is this tiny piece of black plastic at the right hand side, that's the ink roller unit (the ink roller is the bottom of the unit). You could try to remove it with your fingers. If you can't get it out, use a little screw driver and gently pop it out. You can find the replacement on eBay or other outlets, it is about $6 a piece (cheaper if you bulk-buy).

87ccb872-e320-4c8c-8892-a80a5eba933e.jpg

Sharp EL-1701C... • Answered on Mar 08, 2021


What motor are you talking about the fuser motor, paper draw motor, the finisher motor, the transfer motor, the drum motor, the developer motor, corona wire transfer cleaning motor. I can go on. Replacing developer and toner has nothing to do with the motor running, Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

Sharp AR-5320... • Answered on Mar 08, 2021


https://printcopy.info/?mod=erc&brand=Sharp&model=MX6240N&code=F3-12https://www.google.com/search?q=sharp+mx+6240n+error+code+f3-12&source=lmns&bih=625&biw=1366&hl=en&sa=X&ved=2ahUKEwjHjoqR2qDvAhWYlUsFHa4SDbQQ_AUoAHoECAEQAA

Sharp Office... • Answered on Feb 25, 2021


H4-21 means: Sub heater lamp abnormally low temperature detection. The setup temperature (about -25°C: Sim 43-1-1) is not reached within the specified time (about 32sec) from turning on the power ON SW. (When the temperature falls below 140°C in the standby mode.) -Check the sub heater lamp blinking with SIM 5-2-2.

Sharp Office... • Answered on Feb 24, 2021


Try to reset the error code by pressing these buttons :
[#] [interupt] [c] [interupt] [1] [4] [start/copy]
If the error code still exist check the thermistor and it's connection and reset again.

Sharp AR-275... • Answered on Feb 04, 2021

Not finding what you are looking for?
Sharp Logo

Family Lines

14,606 questions posted

Ask a Question

Usually answered in minutes!

Top Sharp Office Equipment & Supplies Experts

k24674

Level 3 Expert

8092 Answers

George Mclaughlin

Level 2 Expert

370 Answers

Cindy Wells

Level 3 Expert

6278 Answers

Are you a Sharp Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...