Question about Kyocera FS-C5030N Led Printer

Kyocera Printer error - Help!

I have a Kyocera FS C5030N Printer and I am getting the following error code 7002:0125392
What does this error mean? Can I fix it, or do I have to call out a service tech (I don't have a lot of $$ to spend...)

1 Answer

Anonymous

Level 1:

An expert who has achieved level 1.

Corporal:

An expert that has over 10 points.

Mayor:

An expert whose answer got voted for 2 times.

Problem Solver:

An expert who has answered 5 questions.
Contributor
6 Answers

The code is for a defective cyan motor. So its either the cyan toner motor or a lump of toner inside the cyan toner container.

Posted on Aug 24, 2008

Add Your Answer

Upload

Upload an image from your computer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

Loading...

Include an image. It's worth a thousand words.

prev next

Related Questions:

1 Answer

Call service Code 4600 KYOCERA FS 8520 MFP

LSU cleaning motor error

When the LSU cleaning motor

is driven, an error signal is

detected continuously for 1 s.

Defective connector

cable or poor

contact in the connector.

Reinsert the connector. Also check for continuity

of the connector cable. If none, replace

the cable.

May 17, 2014 | Kyocera FS-C5030N Led Printer

1 Answer

I changed the blue toner and now it prints with the backgroud blue on every page over what I was printing. It's a Kyocera FS-C5030N

I think that you have used the lens cleaner and then have not pushed it all the way back in.

Oct 22, 2010 | Kyocera FS-C5030N Led Printer

1 Answer

Kyocera FS-C5030N: Streaks blue & red vertical lines to the left of the page? What is causing & how to repair?

Clean waste toner,Drum blade.

Dec 09, 2009 | Kyocera FS-C5030N Led Printer

1 Answer

Kyocera FS c5030n paper comes from the from back rollers not the top

close the back cover... or if its broken tape it down...

I’m happy to assist further over the phone at https://www.6ya.com/expert/norman_d2fa496dce30c65d

Nov 09, 2009 | Kyocera FS-C5030N Led Printer

2 Answers

Kyocera FS-C5030N KX firmware update tool

you are overcomplicating it... all you need is a compact flash card big enough for the firmware... then you upload the firmware to the card and stick the card into the printer... but first power down printer and plug it out and then turn it on and follow the display... it will prompt you

here is the steps...

you will see ready
then press menu... arrow down to memory card
press forward arrow
you will see format
press enter
you will see processing
when its finished
you will see ready...
turn off machine... unplug it...
pull out compact flash
plug machine in
turn it on...

the **** for the compac flash is on the right hand side at the bottom by the ventillation opening...

I’m happy to assist further over the phone at https://www.6ya.com/expert/norman_d2fa496dce30c65d

Oct 09, 2009 | Kyocera FS-C5030N Led Printer

1 Answer