Question about Kyocera FS-C5030N Led Printer
Could be a problem with the cyan ledhead as well
Posted on Sep 16, 2008
Replace the developer unit and that will fix it.
Posted on Aug 24, 2008
Tips for a great answer:
Resetting the Toner Counter
The toner containers must be replaced when the printer displays the Low toner or Replace toner message which will be given depending on the color of toner. The Low toner message will be shown as a pre-warning that the toner is running out and the printer will soon stop, at that time showing Replace toner. If you replace the toner container before Replace toner is displayed, you must manually reset the toner counter as explained below. Note that if you reset the toner counter before the toner container is replaced, the subsequent toner warnings will not be indicated correctly.
I hope this is helpful,
Mar 09, 2011 | Kyocera FS-C5030N Led Printer
7002 is the error code; 0006904 is the printer page count.
Toner motor 2 overcurrent detection error (cyan toner)
• The engine controller PWB (A0004)
detected the overcurrent of toner
1. Lump of toner inside cyan toner container or defectiveness of toner replenishment drive system.
Replace the cyan toner container.
2. Defective toner motor 2.
Replace the toner motor 2.
3. Defective engine controller PWB (A0004).
Replace the engine controller PWB (A0004).
Jan 05, 2011 | Kyocera FS1120D Laser Printer
Oct 22, 2010 | Kyocera FS-C5030N Led Printer
May 06, 2010 | Kyocera FS-1118MFP Laser Printer
Oct 04, 2009 | Minolta magicolor 2350 Laser Printer
Mar 30, 2009 | Kyocera FS-C5030N Led Printer
Nov 03, 2008 | Kyocera FS-C5030N Led Printer
318 people viewed this question
Usually answered in minutes!