Mp600 9 years old not printing properly - Canon PIXMA MP600 all-In-One InkJet Printer

might be the print head has gotten fozen hung up to old wasn't cleaned before shut down

old printer not really worth fixing

First disable the banner sheet. Next try taking sample prints, before changing the drivers at last.

may the catridge is not working fine i thik you did all the cleaning test but you fail i advise you to use new catridge then try it will works

have a nice day and dont forget to rate please.

Call Kodak support, they will replace the printhead free of charge

Change old ink cartridge and clean print head properly.

most likely your ink nozzles have clogged up.
try several cleanings, if it still does not work, you probably have to get the printhead replaced.

connect the chords properly

Assuming that your printer is hooked up properly and ready to print, then the problem could lie with the ink cartridge. You could try holding the printhead of the cartridge over the steam of your jug (using tongs), dab on some tissues and see if you can see ink on the tissue.This could clear the printhead and get you printing again

If the CHARGE/ERROR light is remain on orange with beep 1 times, it mean the paper is not properly set in the feed slot, just remove the paper and reload it properly.
If the POWER light is flashing green, that mean your print job is not finish yet.

YBC (/\)