Change phone number in the speed dial section of canon faxphone L170 plain paper laser

It might be the fuser film thats busted,i recon the u have changed the cart?Does it make a noise when u print?

By pressing the menu button left of the LCD display,scroll to usersettings press ok.Scroll to volume settings press ok and change volume levels there.

On the controll panel there is a diamond shape picture with a eye in it.press that bottom and clear the fax that you received.There is no other way.You will have to phone the sender and ask them to change the papersize settings on the fax machine.

Press the data registration button if dataregistration is displayed scroll to telephone registration,press the set button scroll to one touch dails and press set,program the numbers.

Starting on page 4-8 and continuing thru step 3 on page 4-9 will allow you to setup the mp feeder for legal size paper on your Faxphone L170.
http://gdlp01.c-wss.com/gds/0900006140/FAXPHONE_L170_Basic_Guide_EN.pdf

This is a link to Canon FaxPhone L170 Basic Settings Guide. Look on page 3-4 in Registering Information section.
http://gdlp01.c-wss.com/gds/0900006140/FAXPHONE_L170_Basic_Guide_EN.pdf

http://www.usa.canon.com/consumer/controller?act=ModelInfoAct&tabact=DownloadDetailTabAct&fcategoryid=337&modelid=10116
Hope this site helps.....

can you fax out from the machine?

do you have a seperate fax line? if so check the fax line.
also in the fax menu set up your fax to phone/fax mode, and set up all your fax info.
if you have distinq ring you need to set up your # of rings.

It most likely is the LIU (Line Interface Unit). or you might have it plugged in the wrong port on the fax itself. Make sure it's plugged into the LINE plug. If it's the LIU it would be cheaper to replace then calling for service. Unless it's under warranty still (usually 90 days)