20 Most Recent GE JTP20 Electric Single Oven - Page 3 Questions & Answers


Replace defective touchpad or oven.

GE Ovens | Answered on Nov 03, 2020


Your GE combo is way overdue for replacement.

GE Ovens | Answered on Nov 03, 2020


An appliance parts supplier should be able to tell you whether the two assemblies are interchangeable.

GE Ovens | Answered on Nov 03, 2020


Contact GE directly to request the diagram.

GE Ovens | Answered on Nov 03, 2020


The F3 error code indicates temperature sensor failure.

GE Ovens | Answered on Nov 03, 2020


The parts diagram for the JBS07V6 is available here: https://www.appliancepartspros.com/parts-for-ge-jbs07v6.html . The last two characters indicate the color of the range. The bake element (lower) is part 650 on the body cavity parts diagram. This gives the current part number as AP2031061 or WB44X10009 . See https://www.appliancepartspros.com/ge-bake-element-wb44x10009-ap2031061.html . This is a replacement part number and the previous part numbers are listed on the left hand side of the page (second link).

I hope this helps.

Cindy Wells

GE Ovens | Answered on Oct 20, 2020


Hi


Thanks for using FixYa. Error F3 in your range/oven means oven temperature sensor circuit failure. To resolve this issue you’ll have to check the oven temp. sensor circuit if the reading is more then 1100ohms then it should be replaced. Please do rate the solution if the issue is resolved or post a comment for further assistance.


Thanks
Rylee

GE Ovens | Answered on May 12, 2020


Hello. From the symptoms you describe, your main control board(EOC) is damaged.There are relays on the board that handle the heavy amp load of the heating elements(you don't have 400 amps going thru your key switch when you start your car--same applies to your oven) These relays can burn up, have the contacts shorted together, or the main board can become corrupted due to power surges(storm damage).
The F3 error is a temp error. In an oven, NORMALLY, only the main board and the temp sensor control the oven temp. In 98% of oven temp sensors, the proper ohm reading at room temp is 1100 ohms of resistance(+/- 10%).
Did you have a power outage or "brownout" within the last 4-6 weeks? This is not written in stone but USUALLY, if the board was damaged by a current surge, the chips on the board will start to fail in that time frame. If you give me the make and model of your unit, I can look up the part number and price for you. I hope I wasn't too long-winded and helped you!!

GE Ovens | Answered on Apr 27, 2020


Hi.

The WB24T10140 is an high limit switch that will cutoff when temperature is too high.

Allow the high limit to cool down. Read Ohms on the part. If it still has no continuity( infinite Ohms) then the high limit has blown and must be replaced.

The reason why the high limit has blown is the high temperature generated in the self cleaning cycle.
Self cleaning generates high temperatures to clean the oven. Sometimes this can damage parts as thermal cutoff/high limit, probe, or even control board wiring.

Here all parts and diagram for your oven.

Here one of the cheapest sellers at $40.


Please do not forget to leave feedback.

Regards.

G.


GE Ovens | Answered on Apr 14, 2020


I am unsure whether you are asking for the control itself or the knob or ?
If you google for GE 169152 control part you will get some results, including some manuals. Once you find the part number of the part you are looking for, you can either look for that part online, or you should be able to find a local appliance part supply store/warehouse to get it from. I got a GE genuine temperatire control for my GE range last week from ReliableParts locally.

GE Ovens | Answered on Oct 24, 2019


This means that the Sabbath mode has been enabled. To disable the program, first press and release the Cancel/Off to stop the current programmed bake settings. Then press and hold Settings until Sabbath Mode Off is displayed. See page 14 of the manual for setting the Sabbath mode. The manual is available on the product page: https://www.geapplianceparts.com/store/parts/assembly/C2S995SEL1SS . The current link to the manual is https://products.geappliances.com/MarketingObjectRetrieval/Dispatcher?RequestType=PDF&Name=49-85241.pdf . Most GE oven codes are listed here: https://www.geappliances.ca/en/support/knowledgebase/range-oven-function-error-or-fault-codes . The Sabbath Mode symbol is shown at the bottom of the table.

This mode can be used to set the oven temperature for an extended bake (usually for a low temperature) or a programmed bake. It's used by those who strictly keep the Sabbath but want a hot meal ready when the Sabbath ends.

I hope this helps.

Cindy Wells

GE Ovens | Answered on Oct 06, 2019


https://getsatisfaction.com/gebrillion/topics/ge-double-oven-e97-code

Two posters at the internet link above had suggestions. The following doesn't cost to try:

"Karl McHugh
  • 1 Post
  • 1 Reply Like
you guys are going to laugh at this. have this problem. my repair guy gave me a tip until I can figure out long term....open bottom oven...there are vents at the top. use a flashlite and look in back right corner and you will see a squirrel cage fan. I taped together two long skewers to reach the back...insert through vent to squirrel cage fan and spin a few times. bingo...f code goes away and oven goes back to normal. don't want to do this long term but works until you get a solution. Ive been doing it for a month now but I travel all week and haven't had a chance to get it repaired. this has worked every time...seems like a dead spot in the drive for this???"

GE Ovens | Answered on Sep 09, 2019


GE Ovens | Answered on Aug 18, 2019


Pull the door completely off and re-insert the door on the hinge supports.

GE Ovens | Answered on Jul 12, 2019


Sometimes one must simply accept things as they are...

GE Ovens | Answered on Jun 24, 2019

Not finding what you are looking for?
GE JTP20 Electric Single Oven Logo

61 questions posted

Ask a Question

Usually answered in minutes!

Top GE Ovens Experts

Michael Thomas
Michael Thomas

Level 3 Expert

3056 Answers

Marvin
Marvin

Level 3 Expert

85239 Answers

Cindy Wells

Level 3 Expert

6220 Answers

Are you a GE Oven Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

GE Ovens

  • GE Ovens

Most Popular Question

ge monogram 30 built in oven turns

  • Ovens
Loading...