20 Most Recent
GE JTP20 Electric Single Oven - Page 8 Questions & Answers
1 Answer
Can't get my loc off GE profile oven, door is open but can't use oven.
The "Clean Oven" aspect has been activated and it locks the door. If the door wasn't completely closed when the "Clean Oven" was initiated then that means it is still active. try pressing the"Clean Oven" button a few times to see if it will reset the locking mechanism. This usually fixes the issue you are having.
Hope this helps.
GE Ovens
|
Answered
on Apr 25, 2017
1 Answer
F76 error code on ge oven
One of the most common problems with GE electric built in ovens is the error code "F7? shown on the display. I've seen it many times before and today I had a service call for the same problem again. The error code "F7" will be displayed along with a beeping sound if the ERC (Electronic Range Control) or "clock" senses one or more buttons on the control panel stuck. It could be displayed in any mode: "cook", "clean" or even more often in the "time of the day" mode. In order to fix it, the control panel has to be replaced. This is a very simple job and you will need just a 1/4? nut driver and a Phillips screwdriver. - See more at:
http://www.askgene.com/2007/06/23/oven-error-codes/ge-oven-error-code-f7-and-how-to-fix-it/#sthash.pVUT3Nzb.dpuf
GE Ovens
|
Answered
on Mar 14, 2017
1 Answer
How to change the electric oven GE 168947 elements
Basically you unplug the oven and remove the back, you should see two wires connected to the elements where they come through the oven wall in the back. Unhook those wires. The elements are held in place with nuts on the portions that poke through, remove the nuts and pull the element out through the front, and install the new one. Note that if you break one of the connections on the wires to the heating element, they can be a real chore to repair because they are high heat connections.
GE Ovens
|
Answered
on Feb 18, 2017
Not finding what you are looking for?
