At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
Re: How do i cold reset a HP CM6040F MFP COLOR LASER...
Restart the printer hold down 6 when backlight illuminateshold till all three lights turn on,relese 6 keythen press 3 or 9 to scrool
press 6 to select the optionu want then enter cold reset starts......
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
1 Turn the printer off.
2 While pressing [- Item] and [- Value] turn the printer on.
RESET MAINTENANCE COUNT appears, followed by INITIALIZING.
After a few seconds READY appears.Hope It's resolve all Your Printer Problem,
Or Still having Problem Then follow Us For HP Support
Please follow ------------------------------------- To perform an NVRAM initialization 1. Turn the product off and then on. 2. When the memory count appears on the control-panel display, press and hold 3 until all three LEDs flash once and then stay on. This might take up to 20 seconds. 3. Press and release 9, and then press and release Start. 4. Press and release 6.
The copy processing board has an issue. This board is located on the back of the scanner. Check all the cabling if it is good then the board has likely failed.
If you are looking for the printer driver for this model HP printer then -
You can download the HP printer drivers from their supportWEB site. Please click on this link and
select your model printer to download:-
http://welcome.hp.com/country/us/en/support.html
You will need to order a fuser and replace it or call a service tech who can. The problem is that the electronics on the fuser have actually burned out, so that is why the whole fuser needs to be replaced.
When the memory counts up when turning mfp on, hold down the 6 button until all three lights on left of panel light up, then using the 3 button to scroll go to COLD RESET and touch 6 button to select. If that doesnt fix ya then you may need a hard disk drive
×