For me worked this:
- Turn off the printer
- Turn on the printer
- Push and mantain pushed the button on the back of the printer (near to USB connector) for 30 seconds.
- Release the button
- With 1 to 3 minutes for DHCP Server (if you have one)
The
printer now have a default configuration, if you have a DHCP server
your printer now have a IP Address of your DHCP Server's IP pool.
- Print a coniguration page holding down the green button until the attention LED is blinking
- Release it, 3 pages will be printed.
It is done
Posted on Aug 20, 2010
This was exactly what I was looking for. HP was no help, but Tom Doubrava knows. Thanks!
This will reset configuration of HP JetDirect, not the printer it self ;)
can you cold reset, or restore defaults? I have a red solid error light on a canon d1320 imageclass
×
An expert who has achieved level 3 by getting 1000 points
Cold restart:
1. Turn the printer off.(Power Button)
2. Press and hold down the GO button.
3. Turn the printer on, and continue to hold the GO button for at least 5 seconds, but not longer than 15 seconds. During this process, the Attention LED turns on.
4. Release the GO button
Will go to factory default settings. Even if you are facing any issue, do below said NVRAM initialization..
NVRAM Initialization:
1. Turn the printer off.
2. Press and hold down the GO button.
3. Turn the printer on, and continue to hold the GO button for at least 20 seconds. During this process, the GO button, Attention, and Ready LEDs each turn on.
4. Release the GO button.
Posted on Oct 16, 2021
Turn off your printer, hold the reset button that should be at the back of your printer, turn the printer on again while holding the button, wait until the printer turns in "ready" state.
Hope this works
Posted on Nov 15, 2018
Factory default what?
Do you need to restore the system to what it was like when you bought it? If so, you will have to boot from the system restore disks which you had to make when you bought it.
Assuming that the computer is working and you didn't make the disks, there is an item in the Program list that will let you make a restore CD or DVD.
If your computer is not working and you don't have disks, you will need order them from HP.
Posted on Feb 19, 2009
SOURCE: Resetting network settings to default on HP 2015n
Enter the ip address into your we browser annd reset in the options
Posted on Feb 04, 2009
Resetting the Printer to Factory Default
Settings
Resetting the printer to factory default settings can be useful when
you are troubleshooting with the printer.
CAUTION Resetting factory defaults clears the page buffer, removes downloaded
fonts and macros, and returns all print menu settings to factory defaults.
To reset the printer to factory default settings
1 Press MENU until RESETS MENU displays.
2 Press ITEM until RESTORE FACTORY SETTINGS displays.
3 Press SELECT until the following message appears:
RESTORING
FACTORY SETTINGS
This message displays until the printer has completed the
initialization
Resetting the Printer to Factory Default
Settings
Resetting the printer to factory default settings can be useful when
you are troubleshooting with the printer.
CAUTION Resetting factory defaults clears the page buffer, removes downloaded
fonts and macros, and returns all print menu settings to factory defaults.
To reset the printer to factory default settings
1 Press MENU until RESETS MENU displays.
2 Press ITEM until RESTORE FACTORY SETTINGS displays.
3 Press SELECT until the following message appears:
RESTORING
FACTORY SETTINGS
This message displays until the printer has completed the
initialization
and remove the power cord from the back of the unit. Leave the printer powered off for at least 30 seconds.
button on the printer and hold the "Go" button as the printer is powering on. Watch for the "Attention" LED to turn on and stay steady.
44,905 views
Usually answered in minutes!
That doesn't work. Pressing the "Go"-Button in the power-on-process doesn't reset the printer.
While pressing the Reset button on the back of the printer, turn on the printer. Continue to press the Reset button until the printer is in the Ready state (from 5 to 30 seconds).
×