Di2510 admin password - Minolta DI2510 Black and White Copier

Question edited for a lot more clarity and add maker.
Question moved to maker category.

Cooling Fan failure.

Konica-Minolta Di2510 - Error Code

Printcopy.info https://printcopy.info > model=Di2510 > code=C0045
Code: C0045; Description: Cooling Fan Failure • The Cooling Fan Motor Lock signal remains set to H for a set period of time while the Cooling Fan Motor is ...

Missing: dialta ‎' Show results with: dialta

Error Codes > Konica-Minolta > Di2510 > page 1

Printcopy.info https://printcopy.info > model=Di2510
Code: C0045 · Description: Cooling Fan Failure The Cooling Fan Motor Lock signal remains set to H for a set period of time while the Cooling Fan Motor is ...

which one admin or service

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

Hi,
For D-LINK default password you can try one of these:
Username: admin
Password: admin

Username: admin
Password: blank (just press enter after typing in the username)

Username: admin
Password: password

Admin pass: 00000000 or 12345678

factory default password and username
User: leave it in blank Password: admin
or
User: admin Password: admin

Im going to list in order the buttons you have to push.

1. Utility Button (The only actual button on the control panel. The rest are buttons on the display screen)
2. Admin Management (The Default pass word is "12345678". After you enter the password hit the end button.
3. Admin 1
4. Initial Settings
5. Self-telephone # info
6. Self-telephone #

You can delete the number completly or make it any number you want to. Hope this helps.

Hi,
Default settings will be as mentioned below....
IP address: //192.168.1.1
Username: admin
Passsword: password

Thanks,
Satheesh

pankystu,

The default username and password for most routers is:
username- admin
password- admin

OR

username- administrator
password-

Hope this helps.

-S

there is a small reset button that u will need to push with a pen. Its usually to the back or side of the router.

Just jeep pushing it until the router resets then use the default username and password.

defaults. (normally)
user name - admin
password - admin

username - Admin
password - admin

username Admin
password Admin

user name Admin
password (blank)

username admin
password blank

look in your manual for the default username and password and instructions on how to reset.

Use default username and password, should be found under the router.

Try:

Username: admin
Password: admin

Username: admin
Password: password

Username: admin
Password: sky

Username: admin
Password: (blank no password)