Apple iPhone - Recent Questions, Troubleshooting & Support - Page 4

Ringtones can be set for the whole phone in Settings-->Sounds-->Ringtone. You can set a ringtone for each of your contacts by editing the contact in the Phone app or the Contacts app. When you touch the "Edit" button when viewing any individual contact, you can assign a specific ringtone and vibration, and text tone and vibration, to that contact. If you need further help, reach me via phone at https://www.6ya.com/expert/john_77bb351c0c06b354

yes, you will need an apple TV set up with your television. set up your apple tv with your television, connect to the wifi network on both devices and your screen will be mirrored

Do a hard reset.

1. Press-hold the Home button (big circle below the screen) and the Sleep/Wake button (on top of the iPhone) simultaneously.
2. Continue holding both buttons (Ignore the "Slide to power off") until the iPhone shuts off and begins to restart.
3. You may let go when you see the silver Apple logo.
4. You have completed a hard reset successfully.
5. Don't be alarmed that it takes quite a while to load from the Apple logo to the main screen. This is normal.

If this does not work, put into recovery mode and restore from itunes.
Step One
Open iTunes and connect the iPhone to your Mac.


Step Two
Press and hold the Home button and the Sleep/Wake button at the same time.


Step Three
As soon as the screen goes black release the Sleep/Wake button. Continue holding the home button until you iTunes pops up a message telling you that it has detected an iPhone in recovery mode.

you might of downloaded a song by accident

You may have accidentally moved the Ring/Silent slider towards the top of the left-hand edge of the iPhone. Slide it to see if you can then hear your ringtone. The slide shows a red bar when silent and silver when not.

That means you want to transfer photos from iPhone to computer, you can use iTunes to help you, however, iTunes will back up all data on iPhone to computer. If you only want to transfer iPhone photos to computer, you can read this post, How to Transfer Photos from iPhone to Windows Computer

if its transferring apps from the iPhone, right click on the iPhone under devices in iTunes and click Transfer apps and everything on the iPhone. *Authorization is required.

Try rebooting the iPhone while it is plugged into your computer with iTunes running. Hold down the home button and the sleep button for a few seconds to reboot it. iTunes should then recognize the iPhone as being in recovery mode and you can then use iTunes to restore your firmware.

Upgrade itunes?

it wont restore if you jailbroken it, first you need to do, go to setting-general-about-locate your version ex: 3.1.2 (7D11), download what version you have right now at this link: http://www.iclarified.com/entry/index.php?enid=750ex: iPhone1,2_3.1.2_7D11_Restore.ipsw after downloading, go to itunes, press and hold shift+restore, locate the version that you've downloaded.. enter.

1. Open iTunes.
2. Find the song that you want to make into a ringtone.
   
3. Listen to the song and find the part of it you want to use. The chorus may be a good place to start.
   
4. Write down the start and stop times of the clip.
   
5. Right-click the song and select "Get Info."
6. Click the "Options" tab.
7. Type in the start time of your ringtone in the text box next to "Start Time" in the minutes:seconds (i.e., 2:01) format.
   
8. Type in the end time of your ringtone in the text box next to "Stop Time." Make sure the ringtone is no more than 40 seconds long.
   
9. Click "OK."
10. Right-click your song again and select "Convert Selection to AAC." Wait for iTunes to convert your song. It will create a duplicate version.
    
11. Right-click the ringtone and select "Delete."

"Erase all content" means all of YOUR content, including all applications you have downloaded and all the data for those applications and all the data for Apple applications (i.e. Mail, Photos, Calendar, Safari, etc.) will not be completely removed from the device, they still remain on your iPhone and can be easily recovered by some iPhone data recovery. I highly recommend you to try Safewiper iPhone data eraser app to complete your iPhone data, it will be the best choice when you need to sell your old iPhone or iPad. How to Permanently Erase Contacts from iPhone Before Selling

well currently this is only officially done via iTunes, with a purchased iTunes ringtones. Unoffically applications like iToner for mac or iBrickr for windows are available online. You may have to look around for them but they are available.

Hope it Helps

Z33m

maybe your doing the wrong thing.

follow my instructions and you'll be able to create your own ringtones again!

click on the link below to read my instructions:

http://www.fixya.com/support/r4753790-make_iphone_ringtone_windows_7_vista_or


For more iPhone / iPod touch tips, click here.

It happened to my palm treo....and my frends iphone too..just go to settings >sound notifications> and refresh your ringtones and it will work..dats hw i fixd my 1 and my frends'.

free tutorial on how to jailbreak and unlock iphone here on my website
http://angelmartz.com/?pg=articles&article=5722

then download video recorder for free from cydia after jailbreak

When you connect your iPhone to your computer you can access the photos that are on there on your desktop. If you have a Mac they will already be in iPhoto waiting to be imported. If not then you can just click on your iPhone in My Computer and you can access the pictures that way.

The problem may be because of virus in your mobile phone or memory full, download an antivirus or vacant some of your data. if it is not the problem than call your service provider.

I know a software Syncios is much more better than iTunes, which not only supports transferring music between PC and iPhone/iPad/iPod Touch, but also transferring other data, like photos, videos, movies, contacts, messages, podcasts, ebooks, apps, notes and bookmarks. http://www.syncios.com/pc-to-ipad-air-video-photo-transfer.html

Hi,
You can transfer it manually by using pc suite. Anyway thank for your info.
Regards, Jay