Maytag performa code: 5Ab - Maytag Performa PAV2200

What does the SAB error code mean on my Maytag Range ShopYourWay

See this info:
How to Troubleshoot Maytag Range Code 5A6 eHow

What does the SAB error code mean on my Maytag Range ShopYourWay

The error code shown on the display is"Sab", not "5ab".

To disable the Sabbath mode push and hold the Clock pad for 3 seconds.

Your range is probably in the Sabbath mode. The error code shown on the display is"Sab", not "5ab".

To disable the Sabbath mode push and hold the Clock pad for 3 seconds

Read more: http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/2348-maytag-oven-weird-error-code-5ab.html#ixzz1GLM0d1gp
http://forum.appliancepartspros.com

gas range will not work - 5Ab shoes on electric dial

Push and hold the clock button for 5 seconds to clear the code.

Hi.

I am publishing this tip because of the many users asking me about the code 5AB on Amana, Maytag and other ovens.

Error 5AB in fact does not exist , and what you see written on display isnot 5AB.

The beeping sound is a warning because the oven is in lock condition. The oven is not faulty, and the code is not 5AB, but SAB.

SAB means that the oven is in Sabbath mode, and the control board will be locked for 72 hours with SAB on display.

If power is disconnected a new 72 hours cycle will start.

Depending on the model, there may also be a beeping sound when you try to operate the oven.

Push and hold the Clock button for about 10 seconds, until the display clears, that will reset SAB mode.

If that does not work leave the oven connected and off for 72 hours. If the oven does not unlock after three days, then the electronic control may be stuck in SAB mode because it is faulty, in that case contact the manufacturer at the number listed on the owners manual.

Regards.

Hello.. try to reset...by discooect the ac-cord...wait a few minutes and than connect...if you have the user manual at hand..try to read carefully how to set the clock..good luck ...Ron

same exact thing happened to me! Its not reading *5Ab* it's reading "Sab" as in Sab MODE...PRESS AND HOLD THE CLOCK BUTTON FOR A TOTAL OF 4 LONG SECONDS!! AND WAAAM!! Your stove is fixed and back to normal..with the Time! lol