20 Most Recent Maytag Performa PAV2200 Questions & Answers


Try moving hot hose to the cold side and c old hose to hot side on supply side. this should correct your problem

Maytag Performa... • Answered on Feb 27, 2018


if you go to this site there is a install video for your belt and model... http://www.appliancepartspros.com/whirlpool-whirlpool-dryer-belt-341241-ap2946843.html hope this helps cheers!

Maytag Performa... • Answered on Feb 14, 2018


A transmission problem, I doubt it is worth the repair cost.

Maytag Performa... • Answered on Nov 03, 2017


Check that the exhaust hose is clean and not obstructed or kinked. Clean it from A to Z every six months! Does the dryer heating at all?? .

Maytag Performa... • Answered on Nov 03, 2017


The switch the tube connects to shuts the water off. Will it cut off on high medium or low level. You can try blowing on the tube to see if it works. It should cut off when you blow.

Maytag Performa... • Answered on Nov 02, 2017


is dryer drum turning u might be amotor are some other problem you may want to call a service tech to fix your dryer ok

Maytag Performa... • Answered on Oct 21, 2017


A serious transmission problem, I doubt that it is worth the cost of repair, sorry.

Maytag Performa... • Answered on Oct 03, 2017


The burning smell is your belt(s). Motor is turning but the transmission isn't causing the belt(s) to burn. From the sounds of it, it sounds like your transmission might be locking up. You can try to get the cabinet off of the machine and see if something is stuck in between the inner and outer tub.

Maytag Performa... • Answered on Sep 15, 2017


The black or brown connection block on the motor should be color coded to match the harness. If not you will need to remove the control panel and find the service guide sheet. This will give you the wiring diagram for the whole machine.

Maytag Performa... • Answered on Mar 07, 2015


Try resetting your water level control. If that doesn't help then set the water level control to the lowest setting and observe if level exceeds that setting. If so, you may possibly have a faulty water level control, or an obstruction in the air dome or water level control hose. This can be a tricky 1 to diagnose for a novice.

Maytag Performa... • Answered on Nov 13, 2014

Not finding what you are looking for?
Washing Machines Logo

655 questions posted

Ask a Question

Usually answered in minutes!

Top Maytag Washing Machines Experts

Jessie Goss

Level 2 Expert

162 Answers

Sheldon Dedek

Level 3 Expert

912 Answers

Dan Webster
Dan Webster

Level 3 Expert

8221 Answers

Are you a Maytag Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Maytag Washing Machines

  • Maytag Washing Machines

Most Popular Question

wrong washer fills spins advances but

  • Washing Machines
Loading...