Wont restore to factory default - Ricoh Aficio 1013F Copier

that model number is no good.
if a PC it is see below if a printer see 2nd post.
Restore the factory-set defaults (printer page 92)
why not post what this is first.
a PC a printer, what?
and what the problem is first.
be wise to do that.
PC's have more that 10 resets inside,
facts.
resets and recoveries and fresh OS reloads and more.
lots more.
tell what you have and what's up first.
win
and use the full model numbers not 1/2

Restore the factory-set defaults
CAUTION:Restoring the factory-set defaults returns all of the product and network settings to the
factory defaults. The procedure then automatically restarts the product.
1.
On the product control panel, press (X451 Series) or touch (X551 Series) the Setup
button.
2.Scroll to and press or touch the Tools menu button.
3.Scroll to and press or touch the Restore Factory Defaults button, and then touch the OK button.
The product automatically restarts

When you first enter the printer menus from the operator panel, you may notice an asterisk (*)

next to a value in the menus. This asterisk indicates the factory default setting. These settings

are the original printer settings. (Factory defaults may vary for different countries.)

When you select a new setting from the operator panel, the Saved message appears. When

the Saved message disappears, an asterisk appears next to the setting to identify it as the

current user default setting. These settings are active until new ones are stored or the factory

defaults are restored.

To restore the original printer factory default settings:

1 Make sure the printer is on and the Ready message appears.

2 Press Menu until you see Utilities Menu, and then press Select.

3 Press Menu until you see Factory Defaults, and then press Select.

4 Restore appears on the second line of the display.

5 Press Select.

The message Restoring Factory Defaults appears followed by the Ready

message.

When you select Restore:

• No other button actions are available on the operator panel while Restoring
Factory Defaults appears.....

I’m happy to help further over the phone at https://www.6ya.com/expert/ron_9356d26241d4cbf7

Hi,
I see, Follow the details below to be able to do a Factory Restore on your Acer.

• Click on Start
• Select and Click Programs
• Look for Acer Recovery Management and click on it
• There will be a dialog Box on the Bottom click "Restore"
• Then click on Restore System to Factory Defaults
• Then Click YES if you are sure to restore the system and that you have already backed up any personal or important documents
• After clicking YES click on START to begin the process of restoring the system back to Factory Defaults

Note: If the Original Hard drive Settings/Partition have been deleted or changed it is possible the Restoration to Factory Defaults may not work.
I hope that this will help your restore your machine to Factory Defaults.
Have a nice day,
mvincentc

No cold reset for this model.

Only Restore default Option.

Restore the factory-set defaults
Restoring the factory-set defaults returns all of the settings to the factory defaults.
1. On the product control panel, press Setup.
2. Use the arrow buttons to select Service, and then press OK.
3. Use the arrow buttons to select Restore defaults, and then press OK.
The product automatically restarts.

Hi, Just Try This
1) Factory defaults-
Type *#7780# on your standby screen.
This will reset all your setting to default factory settings. User data wont beaffected. (Default Lock code is 12345)

2) Soft reset-
Type *#7370#
This will reset the phone as well delete user data. Use when want to format thephone.

Restoring the factory-set defaults
Restoring the factory-set defaults returns all of the settings to the factory defaults.
To restore the factory-set defaults
1 (LEFT ARROW) or the (RIGHT ARROW) button to select Service, and then press
Use the
(SELECT).
2 (LEFT ARROW) or the (RIGHT ARROW) button to select Restore defaults, and then
Use the
press (SELECT).
The device automatically restarts.

Then you need to change the default settings back to what they were.

Restoring Default Settings
You can restore the CK31 to factory default settings from
Intermec Settings.
Note: Using the Restore Defaults option restores all parameters
including network settings. When you choose to restore defaults,
you erase the registry. As a result, you may lose network
communications.
To restore factory default settings
1 From Intermec Settings, select Device Settings > Restore
Defaults.
2 Select Restore Defaults and choose the Run App button. A
Run Application dialog box appears asking if you want to run
the restore defaults program.

www.portablesolutions.com

Restore Factory Default Settings When you restore factory default settings to the base station, you clear your Internet connection settings and any special base station configurations that you have established. After the restore is complete, you will need to reconfigure your base station settings or restore these settings from a backup file. You should restore the original factory default settings only under the following circumstances: O You are experiencing serious problems with your base station, and resetting the base station does not fix the problem. O You cannot remember your base station password. In this situation, you must restore the factory default settings by using the Restore button on the base station, and then use the default password admin to log on to the Base Station Management Tool. To restore factory default settings 1. Open the Base Station Management Tool, and then click Management. 2. On the Management menu, click Back Up and Restore Settings. 3. Under Restore factory default settings, click Restore Factory Default Settings. While the original factory default settings are being restored to the base station, the Power light on the base station turns orange. When the light is solid green, the settings have been restored. If you want to open the Base Station Management Tool after the settings have been restored, type admin as the password on the Logon page. Do not attempt to log on to the base station until the settings are restored and the Power light on the base station is solid green. After you restore the factory default settings to the base station, you should navigate to each page of the Base Station Management Tool and reestablish the network settings you want, or restore the base station settings by using a backup file. For information about creating a backup file of your settings, see the following section. Be sure to establish your unique base station password as soon as possible after restoring the factory default settings to prevent unauthorized users from logging on. For more information, see “Change the Base Station Password.” please rate this answer, thanks