I have a brother 5250dn and all lights are flashing! status is flashing , and all others are flashing orange or amber. I pressed the go and cancel buttom at the same time. Then paper light stops flashing and toner, drum and red status light come on and stay on as long as i have the buttons pressed down. what do i do next?
That series of lights indicates a main circuit board failure. You will need a shop to replace the main logic PCB. Could be caused by anything, static shock, bad input power from power strip or power failure, just plain CPU failure. If it's under warranty, 1 year since purchase, you need a Brother service center, out of warranty a new printer would cost less than repair.
I just had the same thing happen, and experienced the same sinking feeling when the printer told me it was a PCB failure. But just for the heck of it, I turned the printer off, waited a minute, and turned it on again. PROBLEM GONE! Printer printing normally.
Anybody have any idea why the readout after pressing Go and Job Cancel together was so wrong?
It's just a glitch then. Possible power fluctuation.
×
4,713 views
Usually answered in minutes!
×