Question about Maytag Atlantis MAV6451 Top Load Washer

3 Answers

Maytag MAV6257AWW Washer

Fills with water, then when time to agitate it makes this noise, and does not agitate.
Some times does not spin on first rinse spin, you have to reset to have it work.
Close are dirty because of no agitation.

Thank you,
Sharon Martins
[email protected]

Posted by on

  • sgordeanio Jan 14, 2008

    sounded like the tub was off set or uneven cloths when trying to agitate. Or gears hitting each other.

×

Ad

3 Answers

Washer machine filled with water then about 10 minutes into wash just stopped. Doees not respond in anyway. model # mav6257aww

Posted on May 18, 2008

Ad

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 196 Answers

Could you describe the noise you are hearing. This will help to determine what to look for.

Posted on Jan 14, 2008

  • Elmer Vest
    Elmer Vest Jan 14, 2008

    1. It is quite possible that the Thrust Bearing is worn out. Thrust bearing and associated parts are located above the pulley on the bottom of the transmission.



    These are the parts inside the square.

×

Ad

  • Level 1:

    An expert who has achieved level 1.

    New Friend:

    An expert that has 1 follower.

  • Contributor
  • 1 Answer

Maytag MAV6257AWW not going in to spin cycle, just stops and the timer buzzes, the lid swith has continuity

Posted on Mar 14, 2010

1 Suggested Answer

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

I have a Whirlpool Gold washer (MOD# GSQ9669LW0). The washer makes a grinding noise below when in operation. Spins when agitating, but not in rinse mode. Water still pumps out in final spin.


This machine can get items stuck in the drum, the bearings can go bad etc. https://www.repairclinic.com/RepairHelp/How-To-Fix-A-Washing-Machine/38-5-620929-/Whirlpool-Washer-won-t-spin-GSQ9669LW0.

Oct 16, 2017 | Whirlpool Washing Machines

1 Answer

Washer not agitating properly.


Try looking under it as I've had that problem and found it was build up of dust

Jul 11, 2015 | Kenmore Washing Machines

1 Answer

Please describe a typical washing cycle to me on the RTW4440XQ Roper 3.1 Cu. Ft. Top-Load Washer, please.


The typical cycle is;
fills to selected water level
agitates wash cycle
drains wash water
spins wash cycle
fills to selected water level on rinse cycle
agitates on rinse cycle
drains rinse water
spins final time
end of cycle

Aug 08, 2011 | Roper Washing Machines

1 Answer

Whirlpool top load washer no low-speed agitation. The unit fills, starts the wash cycle with normal agitation, but after a few minutes it just sits there soaking until the it's time to drain/spin. Drains...


Either the wire going to motor for non working speed is loose or damaged, or motor is bad. It could also possibly be timer not sending power to motor for that speed.

Sep 27, 2017 | Whirlpool Ultimate Care II LSQ9549L Top...

2 Answers

Maytag PAV2300AWW Washer makes grinding sound when agitating


Sounds like it is the bearing on the water pump. Take off back plate and replace and remove 3 screws and two hoses (the one hose is a waste line so make sure you have a bucket to empty our waste water) after removing these remove belt on bottom of pump.

Sep 29, 2009 | Maytag Performa PAV3200

1 Answer

WHDRR418G1WW WASHER WON'T AGITATE OR SPIN, NOT MAKING NOISES. FILLS AND DRAINS FINE.


sounds like you have a broken lid switch on the washer, maybe someone slammed the door or placed or stood on top of the washer, a broken lid switch won't allow washer to go into spin mode is a safety device so if is on spin cycle an someone sticks their hand it the machine stops an not breaks your hand.

broken lid swtich

good luck leave some feedback thanks!

May 28, 2009 | GE Washing Machines

3 Answers

Water fills to proper level but agitator doesn't come on instead there is a grinding noise, when I move control to just prior to rinse cycle water drains properly, but still just grinding or buzzing n


Hi, Do you know if the washer spins at all?
It sounds like the coupler has gone bad.
Please let me know if it spins at all.
I can send yyou instructions on changing the coupler.

Vic

May 28, 2009 | Whirlpool LTE6234D Top Load Stacked...

1 Answer

MY GE WASHER MACHINE FILLS WITH WATER BUT DOES NOT WORK AFTER THAT. IT DOES MAKE SMALL NOISE LIKE MOTOR BUT DOES NOT WORK.


it is not a maytag washer machine it is G.E it fills fine with water it also drains and spins but does not agitate.

Apr 09, 2009 | Maytag LAT3600A Top Load Washer

Not finding what you are looking for?
Maytag Atlantis MAV6451 Top Load Washer Logo

Related Topics:

875 people viewed this question

Ask a Question

Usually answered in minutes!

Top Maytag Washing Machines Experts

jimorris77

Level 3 Expert

411 Answers

Sheldon Dedek

Level 3 Expert

909 Answers

Bill Long

Level 3 Expert

606 Answers

Are you a Maytag Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...