Not recieving fax - HP PSC 2410 All-In-One InkJet Printer

Have you tried installing new drivers and software from hp. Sometimes there is a glitch and resetting the software helps.

Be sure the fax is on the proper phone line. You can send on any line but you can only recieve on the line for your number.

DickyO

Check if the machine is set on automatic recieve.
When on manual recieve, you'll have to start recieving manualy by pressing the button.

The machine is set with the sleep mode as a default. The fax part can be changed to recieve a fax by pressing the fax mode button. Press it until it says Fax only, not F/T. F/T means Fax/Telephone. This mode would make it to where you have to pick up the reciever and press start when a fax comes in. The Fax only mode means it will pick up everytime a fax comes in automatically. Let me know if this was helpful. Please give my helping a rating. Thanks!

Try unplugging the power cord for 10 seconds to reset the machine.

Scroll through the menus and set your machine to AUTO or AUTO RECEIVE.

please help me how to switch my machine Brother MFC440cn to fax/tel mode.

Please double check all cords and besure you are in the right plug.

now printer of colors

if you have the fax-575 there should be a TAD setting.

This is the setting you would use if you're using an answering machine on the same phone line as your fax machine.

To set the Recieve Mode :

Press Recieve Mode. The LCD display shows your current selection.

Continue to press Recieve Mode until your new selection appears. After 2 seconds the screen returns to the date and time display, along with your new Recieve Mode setting.


The 4 Recieve modes are Fax Only, Fax/Tel, TAD:Answering Machine, Manual.

Hope this helps!!!

DR mode means that Distinctive Ring is set to on which will force your fax machine to manual receive. Turn DR off and you can set it to whatever mode you want.