Why my printer2450 notprinting? - HP DeskJet 6540 InkJet Printer

It is probably out of ink. Check ink cartridges, or use the machine manufacturer's software to report on ink levels or on the status of the printer.

Replace the printer

try another catrige, check if anything stuck in nozzles, use proper catrige, the number of your originle catrige and current should be same,but for sure the problem with either with your catrige or the place where you fix you catrige.

Remove printer , uninstall and then reinstall the printer software.
Connect printer to be installed .
Take a test print to check the printer. If there is any mechanical jamming of the rollers or a fault in the paper detect , it must be checked out.

1) make sure you do not have any error on the screen like TONER LIFE END

2) Once a fax prints a fax it is no longer in memoery UNLESS you setup that feature before hand.

there are only two reasons why faxes would notprint - because there is an error or no toner.

another thing might be that you are not acutally recieving faxes. The sreen may say you are but it is cut off before the transaction can be completed.

Call Brother Support - it is free

If you are not getting an error message, your nozzles may be clogged. If you are using aftermarket or refilled cartridges, insert new OEM cartridges and run deep cleaning a number of times (3x) and the realignment utility. This should clear the nozzles and the cartridge sensors. Secondary market cartridges often do not meet manufacturer's specifications and can clog the printer nozzles. This should clear the problem.

At the New Zealand Cannon site, you can download the Manual for it here:

http://www.canon.co.nz/products/all_in_one_printers/all_in_one_printers/mp210_nz_support.aspx

Just click Manuals and select the appropriate one. The manuals include all FAQs and procedures for such needs as cleaning the heads, and changing the cartridges.

If you cannot view it, google for Cannon, go to your country's site, search for your model, find the manual and it should help you.

If not contact their customer support from their site.

Good luck!

if that is a refilled cartridge, you might have a problem with the ink. try print something (text) in pure black , and grey only, and see waht happens, if does notprint, means the printer has hard time with that black cartridge.

I fixed the printer by unistalling the programme and the re-installing it again and it is fine again it came down to one thing in the end and the driver needed to be updated theactual printer was fine. Windows did the updating and i installed the programme all over a again.

Thanks again for getting backto me so soon.

Regards

Ann-Marie

dear sir
it's a cartig problem may be yr cartig is SHORT it means it's circut is damage or not work so yr printer is not recognize that time yr printer understand that there is no cartig avalable so try to replace yr cartig it's help u

Thanks
Please vote
jo_chinmay