HP DeskJet - Recent Questions, Troubleshooting & Support


Right click printer properties and select online. Start /settings /printers. Offline can also indicate a connection is not available - this occurs with demo versions of printer software. When the demo expires, the printer goes offline. The fix is to just use windows networking and shared printer.

HP Deskjet 6980... • Answered on May 06, 2021


  1. To setup Wireless network to your printer, the HP Deskjet 3755 Wireless Setup Wizard is an easy method.
  2. Tap on the printer power button to turn on your printer. On your printer's control panel, click the Wireless icon.
  3. The Wireless Summary screen gets displayed. Click Settings->Wireless Setup Wizard.

HP Deskjet 3755 Wireless ' 123 HP Setup 3755 Wifi ...

HP DeskJet 3755... • Answered on Apr 05, 2021


Hp deskjet f2280 pinter don't install in windows 7. now what can i do ?

HP DeskJet F380... • Answered on Mar 06, 2021


This printer model F380 will not show 0x610000f6 error. It means "Ink Delivery System failure". Please confirm your printer model.

HP DeskJet F380... • Answered on Mar 06, 2021


On Printer and faxes, right click on your printer and unselect "Use printer Offline". If "Use printer Offline" is not select, then verify you USB cable.

If I could be of further assistance, let me know. If thishelps or solves the issue, please rate it and give a testimonialfor my response.

HP Deskjet D2360... • Answered on Mar 05, 2021


I have had this same problem a few times, not due to changing the cartiges, but following one of my kids yanking on a peice of paper as it was printing. After I tried all the unplugging and clearing and re-starting, the arm was still stuck on the left. I read on some forum (can't remember where) while the printer is off, to gently push/pull on the cartiges until they un-jam or start to move. I flet like I was going to break it, but it has worked every time.

Hope this helps osmeone else!

HP DeskJet 5550... • Answered on Mar 03, 2021


Open Paint, from Start>All Programs>Accessories and select File>From Scanner or Camera...

HP DeskJet F4280... • Answered on Feb 11, 2021


you need to print only in black if that is all the ink you have, and also you need to remove the color cartridge as it still registers in the printer as able to be used, although it is empty or near so. Did you remove the tape over the print head fron the new ink cartridge? Do a print head alignment, or use the toolbox icon to tell the printer that you just replaced the cartridge. Some HP models chip the ink cartridges so even a refill wont register as a full tank and the printer wont print. chip needs to be reset (difficult) or just replaced with a new cartridge.

HP DeskJet 940c... • Answered on Feb 11, 2021


The HP Support Assistant is a free software of Hewlett Packard company that released after 2012. It helps users to fix issues with the computer using updates and self-help options. If you don't have this program on your HP computer, you can simply download it from HP official sites. You can also get help from experts via this utility to fix problems with your HP device.

HP DeskJet 3940... • Answered on Feb 11, 2021


You cannot reset the ink level indicator for the HP 60 ink cartridge. It shouldn't matter anyway because the level is only estimated for "management purposes only" (see user manual) meaning to let you know when it's near time to order a new cartidge. I have tried cycling through 3 different cartridges to reset the ink level for the one I refilled but it didn't work. Refill and just ignore the ink level indicator. Also, it's a good idea to clean the print heads with the solvent in the refill kit before refilling to remove old ink and imrpove print quality.

HP DeskJet F4280... • Answered on Jan 12, 2021


HP 1220c driver for Win 7 is nit working, need help

HP DeskJet 1220c... • Answered on Jan 12, 2021


download hp deskjet 1280 for win 7 32 bit http://www.wupload.com/file/3797628/HPDJ1280_for_win_7.exe

HP DeskJet 1280... • Answered on Jan 12, 2021


click on start, then click run, type in the word services.msc, you will then get a list of options scroll down the lost to the letter p and find the word print spooler. click print spooler once then in the left corner you will have to options, either to stop or refresh, before doing anything take the usb out of the back of the printer, then click on stop, then click start, then click refresh, after this put your usb back in the printer, and that ''should'' solve the problem. email me if works or does not, thanks

HP DeskJet F380... • Answered on Jan 12, 2021


Hi,
i was in HP tech support supporting AIO printer models, Just click on the link u will get a popup window to download the Driver for ur Printer.

http://snipurl.com/f380_driver_xp

HP DeskJet F380... • Answered on Jan 12, 2021


The DeskJet printers are notorious for this problem. When you turn the printer off and back on in the middle of a print job, it gets confused when it is back on and cannot interpret the print language when it resumes from the computer. Whenever this happens in the future, you need to delete the print job off your pc before turning the printer back on. If you have windows XP, click START, SETTINGS, PRINTERS&FAXES, then double-click on your printer icon. When the queue window comes up, right-click on the active print job, select DELETE, then reply YES to confirm. If you don't see the print job delete (it might take a minute or so), then you will have to stop/start your Windows print spooler. Go to START, SETTINGS, CONTROL PANEL. Double-click the ADMINISTRATIVE TOOLS icon. Double-click the SERVICES icon. Scroll down and locate PRINT SPOOLER. Right-click on it and select STOP. Wait about 10 seconds, then right-click on it again and select START. Close out of the SERVICES & CONTROL PANEL windows. Open your printer status window again and see if it is clear. Once it is clear, it will be safe to turn your printer back on. Hope this helps.

HP DeskJet 648c... • Answered on May 23, 2020


Dear rowanleigh,

What u have to do is just unistall the printer Driver restart the system then Reinstall the printer driver. and also do one thing delet all the temp files, temporary internet files & run the Disk cleanup tool.


Regards,
Bittu_8


HP DeskJet 3930... • Answered on Mar 18, 2020

Not finding what you are looking for?

12,312 questions posted

Ask a Question

Usually answered in minutes!

Top HP Office Equipment & Supplies Experts

efs_perpends
efs_perpends

Level 3 Expert

1997 Answers

Cindy Wells

Level 3 Expert

6259 Answers

k24674

Level 3 Expert

8092 Answers

Are you a HP Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

HP Office Equipment & Supplies

  • Forum

View Most Popular

  • HP Office Equipment & Supplies
Loading...