I have a Canon NP 7130F which prints out only blank paper
After attempting to make a copy all I get is blank copies. I have already changed the toner and it still prints out blank copies. Any remedies for this??
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
do you already change your drum?pull out your developing unit and you can see cooper plate inside the machine,possibly its broken or this problem due to yourHV board.You can try change your AE sensor. Very old model
toner, charge or dev not in position or of cause we could go for upside down original, my guess toner 75% Carona/charge roller 20%, 4% Dev unit outa position, 1% blank original.....hows that for 20 years summed up on white paper;)
1) you do not dump toner into the drum! Juo dump it into the toner unit. 2) didi you after replacement put the blue toner handle (right from toner unit) into the left position?
try also to change or to service the corona units both the upper corona in the drum unit and the the transfer corona assembly unit down the drum. ok try your best.
hi im jules_09.have check the drum unit and the fuser unit check the
two unit.first of all the drum unit the drum may be scratch or
damage that goes with the fuser unit too.
×