HP C4Photosmart C4110 All-In-One InkJet Printer want print black110

You may have blocked print head nozzles.
Try the printer maintenance to clear the printer nozzles.
After several deep cleaning attempts and there is no improvements in the printthen a new print head is required.
A new print head maybe expensive and it maybe more cost effective to purchase anew printer.

Try Using the HP Print Diagnostic Utility in Windows - HP Customer Care (United States - English)

there must be a problem on the mechanical system specially the cartridge carrier open the cover and check for any breaks on the belts replace them if any.

replace all carts with new HP carts to get a sucessful alignment

You must replace all ink carts with GENUINE HP carts to get a sucessful alignment.

You have to reinstall the printer drivers

Please reinstall your printer driver again.

• I replaced both carts with HP brand, no joy.
• I cleaned the cart/printer connections, no joy.

An interesting aside is that if one or the other cart is removed, the appropriate LED goes out and the other blinks. At least some of the sensing circuitry sees the cart.

Anyone have a schematic of the cart/printer electronics?

Put the printer in the mode for changing the carts. Take out the Black ink car and clean off the heads on it. Looks like brown in color it's on the cart at the bottom To clean use paper towel with cold water never use warm or hot. Clean the area where the in rest in the printer also if you can reach it. The noise you hear is that the cart didn't go back in the right position. You have to be cart not to force these carts out as everything in this printer is made of plastic.

1. Took out the color ink cart and clean the copper contacts of the ink cart with cotton swab, make sure that you do not touch the silver nozzle .
2. Try new ink color ink carts as someime this issue came up when the ink carts are about to finish up.
3. Replace the ink carts and do not us a refill ink.