ADMIN Eric posted an answer for this Aston Martin Cars & Trucks:
"Possibly a broken wire/ bad connection. Check under the wing behind the stone guard."
ADMIN Eric posted an answer for this Hitachi Air Tools & Compressors:
"I would check the main switch/speed control for a fault, assuming the battery is not..."
ADMIN Eric posted an answer for this JVC Video Cameras:
"Error 3 means the mechanism is stuck/jammed. Take it to a JVC Camcorder service agent."
ADMIN Eric posted an answer for this Washing Machines:
"It could be the drain pump is jammed."
ADMIN Eric posted an answer for this LG Televison & Video:
"Probably not cost effective, due to specialist tools to remove and press the new bearing..."
ADMIN Eric posted an answer for this 2006 Cadillac SRX:
"If the sunroof hasn't completed closing or cannot be reset by the BCU the vehicle will..."
ADMIN Eric posted an answer for this Volvo Cars & Trucks:
"There is no access from behind the rear seats. You can either call your Volvo dealership..."
ADMIN Eric posted an answer for this Motorcycles:
"The mixture srew sets the idle smoothness; too weak and it will misfire/hunt, too rich and..."
ADMIN Eric posted an answer for this Motorola Cell Phones:
"Why would you want a Sanyo App for a Motorola phone I wonder..."
ADMIN Eric posted an answer for this Chrysler Cars & Trucks:
"Either a faulty/incorrect starter solenoid or the starter is the wrong size. Check by..."
ADMIN Eric posted an answer for this The Computers & Internet:
"I would check your documentation when you purchased the software from the codes otherwise..."
ADMIN Eric posted an answer for this Cars & Trucks:
"I would try www.snapontools.com"
ADMIN Eric posted an answer for this Olympus Cameras:
"Could be a steamed up lense or just dirt from storage. It is over 10 years old so possibly..."
ADMIN Eric posted an answer for this Samsung Televison & Video:
"Check in the service menu."
ADMIN Eric posted an answer for this Honda Cars & Trucks:
"Is the old pump OK? Did you check for power before removal? I would check for..."
ADMIN Eric posted an answer for this Samsung Televison & Video:
"I would employ a Samsung registered engineer to repair the power supply. Seems like he..."
ADMIN Eric posted an answer for this Audio Players & Recorders:
"Broken drive pulley or belt maybe."
ADMIN Eric posted an answer for this Suzuki Cars & Trucks:
"Do yourself a favour and for your own safety, take it to a Suzuki garage for..."
ADMIN Eric posted an answer for this Washing Machines:
"I would contact the manufacturer, they should have manuals for free on their web site."
ADMIN Eric posted an answer for this Sony Ericsson Cell Phones:
"Contact your service provider, they should know if you can change networks.
It is a 2 &..."
ADMIN Eric posted an answer for this Cars & Trucks:
"Resistance is just a guess, inductance is what matters."
ADMIN Eric posted an answer for this Ford Cars & Trucks:
"If you have an electrical fault and the battery is low, the ECU will increase tickover to..."
ADMIN Eric posted an answer for this The Computers & Internet:
"Hypelinks can encourage spam and are dicouraged."
ADMIN Eric posted an answer for this Mazda Cars & Trucks:
"If the engine is spinning over and it is an interference engine, there is enough kinetic..."
ADMIN Eric posted an answer for this HP Electrical Supplies:
"Hopefully you have the correct reach spark plug. Too long and it will jam up the piston."
ADMIN Eric posted an answer for this Cars & Trucks:
"If the brake switch wire is melting, there is an issue with the size of fuse supplying..."
ADMIN Eric posted an answer for this Honda Cars & Trucks:
"Fuel calibration error. Probably needs you to run a drive cycle if not, calibrate the fuel..."
ADMIN Eric posted an answer for this Toyota Cars & Trucks:
"If it started before, sheck the plug wires are in the correct order and that you have a..."
ADMIN Eric posted an answer for this Microwave Ovens:
"Please confirm both make and model of your microwave cooker."
ADMIN Eric posted an answer for this Cars & Trucks:
"If it is a coil, swop it with a good one to prove it is at fault before throwing money at..."