How do you retrive the meter reading on HPLJP2035N

allow the machine to come to ready
press the TICK button press down untill Information press TICK press down until Print config pages press TICK - take config pages from exit tray
Done!

enter the menu using the menu button press down till you get to information press enter move down to configuration and press enter (tick) select configuration page and print look for the term Engine Cycles ( this is how 'old' the machine is in copy count terms)

How do i retrive my masaage

hi 2go password help

On some 1995 OBD 1 models with a 12-pin Data Link Connector, trouble codes can be accessed by connecting terminal B to terminal A with a jumper wire. With the key in on position, the codes can be read by watching the "service engine soon" light. HOWEVER, some models have a 16-pin DLC and you have to jump terminals 5 and 6 to get the trouble codes to flash.

Go to Schuck's/NAPA/Chief's/Auto Zone and they will read it for FREE!!

FREE is always good!

Greg

try connecting it t different computers. if it reacts the same. well im sorry i think your 4gb sandisk flashdrive is damaged. and im sorry to tell you if that so, there is no way u can get your files back.

Tried reading with a card reader which didn't work. I bought a retrival progam and retrived lost files.

Try any parts store and see if they will read codes for you. Then post those codes and we will go from there.

Hi Ern, Usually the phone has a default code you dial when you attempt to get messages from your home answering machine.
Try calling your home, let the machine pick up, after your message is heard dial 1234. Your machine should recognize the tones and play your mesages back to you. I just happened to read that earlier today while setting up a new message on our office phone.
Hope this helps, RadioWidgets