Adjusting time How can I change the time on the CANON FAX-L350? We lost manual and I only find software installation guide on the net. I try to find how to change time on the faxmachine itself.

Lift the flap on the right-hand side of the fax machine.
Select Data registration
use the down arrow
1. Data registration
SET
1. User Settings
SET
1. Date & Time
SET
Enter date or time
SET

Good Luck!
Hope this helps!
CreativeTECH

You can download the software for this unit from this link.

http://software.canon-europe.com/products/0000502.asp

On the key panel there is a receive mode button or press the dataregistration button.Scroll to RX setiings press set and scroll to RX mode change it to fax tel.

http://safemanuals.com/user-guide-instructions-owner-manual/CANON/FAX-L350-_E
Hope this is what you were looking for.

Canonusa.com you can download drivers.

I’m happy to help further over the phone at https://www.6ya.com/expert/jayw_0e86fb055a7b73de

http://software.canon-europe.com/products/0000502.asp

Select OS and download.

To set up the L350 as a local printer (I'm assuming that you are not putting it on a network) you will need the Canon FAX-L350 CD-Rom which contains the Fax suite (I have version 3.11). You will also need a parallel printer cable as the fax machine only has a parallel printer port on the rear (the other side to the power cable.

When loading up the CD-Rom (which should have been supplied with your machine - if not you may have to buy one off the web), first make sure you read chapter 2 in the manuals folder on screen then install the driver from the 'program setup.exe' file.

After loading the CD-Rom onto your PC (and before making any physical connections between the PC and the Fax) make sure that the fax is switched off at the mains and also logout and switch off your PC. Next, connect up the cable (Canon recommend a cable that complies with IEEE1284). Centronics supply these cables, but if you do not have a parallel (8 bit ) port on your PC you can get a converter cable (Centronics 36) which will connect the parallel cable to a USB port on the rear of your PC. After checking the connections you can switch your fax back on and also power up your PC. Hope this helps.

I DONT HAVE THE SOFTWARE FOR THE DRIVE FAX -L350
SO I NEED THE FREE SOFTWARE FOR THIS DRIVE
AND I WANT TO DOWNLOAD IT NOW

open the side door
press data programing
data regretion
user data

Left the flap on the right hand side of the fax machine.
Select Data registration
use the down arrow
1. Data registration
SET
1. User Settings
SET
1. Date & Time
SET
Enter date or time
SET