On light just keeps blinking, and blinking, and blinking

the problem is that your cartridges are expired or bad, just replace the two cartridges with a new one

The manual for a related printer suggests that you have a printer failure issue. If the paper lights are off, then it is a scanner failure. If the paper lights are also blinking, then it's a fatal error. Turn off the printer, unplug the unit and then wait one minute. Plug it back in and turn it on, if the lights keep blinking then call HP support. (If it is under warranty, then it may be worth fixing.)

If I misunderstood your post and the power light is steady but the other lights are blinking, then you may have the cover incorrectly positioned or something blocking the ink carriage. Open it up and check for anything out of place.

I hope this helps.

Cindy Wells

This mean multiple ink tanks of the same color installed or Ink tank in a wrong position.Check your ink tanks.This ink tanks has a memory chip.Sometimes this chip fails.
If the green light blinks with a orange 7 times this mean the waste ink tank is full.Follow this:
1. Turn off printer
2. Hold down Resume button and press Power button.
3. Keep holding down Power button and let Resume button go.
4. Press Resume button 2 times then let BOTH buttons go.
5. Green lights will flash and then stop blinking.
6. When green lights are solid, press the Resume button 4 times.
7. Press the Power button and the printer should turn off, if not, press the Power button once more.
8. Your printer should respond as normal.

one of the cartridges is dead and must be changed. buy new one and the problem will be solved.

The indicator light blinks, it says you're low on ink in one or both cartridges. If you've changed cartridges and it still blinks, you may have stuck or dirty pins in the cartridge station(s). Use a damp, lint free cloth to make sure the pins are clean and move freely

what does it say next to the blinking light for example check paper, check ink cartridge, etc.?

tom

if you have ink blinking change ur cartrigars, as black is needed to be filled not necssary for color.
and in my case my black was empty and my color was damaged. so i had to replace both of them.

Can I get the reply now? I have a whole lot of documents waiting to be printed.

Usually tear drop means 'out of ink'

Hi Greenhorn, Your info is slightly conflicting - I think. As I remember the C60 has just 2 LED's: 1 - Green for Power 2 - Red for Error The third button - Cartridge exchange - has no LED Now it is a while since I looked at a C60 and my brain leaks like a sieve, but that's the way I remember it and feel free to correct me if I'm wrong. The error codes I remember are: Printer status - Indicators - Priority Power - Error Power ON condition On - Ink sequence Blink - Ink Cartridge change mode Blink - Data processing Blink - Paper Out *1 - On Paper jam condition *1 - On Ink end (Black) *1 - On -> Blink Ink level low (Black) - Blink-> Blink Ink end (Color) *1 - On -> Blink2 Ink level low (Color) - Blink-> Blink2 Ink end (Black and Color) - On -> On No Ink Cartridge (Black or Color) *1 - On Maintenance request (Ink Overflow Countererror) *1 Alt Blink Alt Blink Fatal error *1 Off On Special setting Blink2 Blink2