CM6040f error 60.05 - LaserJet HP Office Equipment & Supplies

49.XXXXX ERROR To continue turn off
then on
A critical firmware error occurred. Remove third-party products. Turn the
product off and then on.

1 Turn the printer off.
2 While pressing [- Item] and [- Value] turn the printer on.
RESET MAINTENANCE COUNT appears, followed by INITIALIZING.
After a few seconds READY appears.Hope It's resolve all Your Printer Problem,
Or Still having Problem Then follow Us For HP Support

hi,

Error related tray lifting....just check which tray is not lifting and find "is there any kind of abstraction to lift the tray".
Then just refix the tray lifter assy. connector otherwise replace lifter assy.

hope it will help.

Change the fuse!!!

59.30 means that the fuser motor experienced a start up error.
If power cycling the printer won't clear the error you probably need a tech to troubleshoot and/or replace the motor.

If you are looking for the printer driver for this model HP printer then -
You can download the HP printer drivers from their supportWEB site. Please click on this link and
select your model printer to download:- http://welcome.hp.com/country/us/en/support.html

You will need to order a fuser and replace it or call a service tech who can. The problem is that the electronics on the fuser have actually burned out, so that is why the whole fuser needs to be replaced.

> FUSER ERROR

The FUSER is the part of any dry-ink laser-printer. It heats up, and melts the dry-ink onto the paper.

So, an ERROR indicates that the fuser is NOT reaching its "working" temperature.

Replace the FUSER, or take the printer to a qualified technician for remediation.

A critical firmware error occurred.
Power off the printer. Wait a couple of minutes and then power it back on.
Make sure that it is plugged directly into the wall outlet. No surge protector.
If error returns, go to www.hp.com. Check for the latest firmware for your printer.
Download and install it.