20 Most Recent Hoover Nextra HNF 2137 Front Load Washer - Page 4 Questions & Answers

There is a common issue with those machines and the wiring harness, when the machine spins, the drum causes the wire harness to flex and vibrate and this can cause the wires to break loose. To check this you need to unhook and unplug the unit and drain it, Then you can lay it down and look under it to see what is causing the issue;

Most likely is the lid lock. Logic board will not allow spin to take place if the lid is not locked.

https://www.espares.co.uk/advice/careandmaintenance/how-to-fix-an-e08-error-code-on-a-hoover-washing-machine

CONTACT A DEALER OF THAT MAKE

https://www.espares.co.uk/advice/careandmaintenance/how-to-fix-an-e10-error-on-a-hoover-washing-machine ..

Your Hoover could have a stuck cycle timer, a defective control board, or failure of some controlled element, for example the pump.

https://service.hoover.co.uk/advice-centre/the-letter-h-and-a-number-has-appeared-in-the-display-of-the-washing-machin/

fixya does not sell Hoover parts. check with an appliance parts supplier or directly with Hoover.

Defective power switch and/or cycle timer

Is usually a sign the washtub suspension is worn or broken.

Either the door lock has failed or the wiring or the programmer has a problem. Removing the cabinet top should allow a view of the wiring, etc. Manipulating or removing the door lock from inside the cabinet isn't easy as often the retaining screws are accessible only when the door is open and carefully applied brute force is the last resort.

if the hoses are clear I suspect ur have a control board problem

https://www.youtube.com/watch?v=3R_RYO6jSOs E21. Canister fill pump triac faulty. Possible fault Wiring faulty; Electronic board faulty. https://www.how-to-repair.com/help/e21-e22-error-code-tumble-dryer-pump-fault-aeg-electrolux-zanussi-etc/

Hi! Look here:https://service.hoover.co.uk/advice-centre/error-code-e20/ - error solvinghttps://www.bestadvisers.co.uk/portable-washing-machines - portable washing machines, just in case (i use it like an extra washer)

https://www.youtube.com/watch?v=zjULf1lLW5U

i only find e21 error for hoover washers...

Hoover suggests that the water fill valve(s) may be turned off. Error 2 means It cannot fill correctly according to their owners manual.

Try here https://www.fix.com/parts/