20 Most Recent
RCA RP3720 Clock Radio - Page 3 Questions & Answers
Rca remote for Home theater rts735e is not working, is they a compatible universal remote?
I m making over 15-k bucks a month working part time. I kept hearing other people tell me how much money they can make online so I decided to look into it. Well, it was all true and has totally changed my life.
:) AND GOOD LUCK.:)
HERE ?? http://PaysBuzz.com/
7/20/2021 5:57:15 AM •
RCA Audio...
•
Answered
on Jul 20, 2021
How to hook up a vintage Marantz receiver to a Klipsch sub woofer with no sub outputs on receiver. I do have main in L and R
Pre out L and R
On the back of receiver. They use RCA jacks. The sub has L and R inputs using RCA jacks. How to connect?
The subwoofer is much more than just another bass unit and the purpose is to reproduce sub-audible content in order to add ambience to the listening experience and before it can reproduce the sound it must first be part of the recording or performance. Even if a recording is rich in sub-audible content, unless the amplifier is designed to process and filter sub-audible frequencies, the amount of content available at the output is likely to be minimal.
A pair of good 3-way loudspeakers will, most of the time produce a purer and more realistic sound with plenty of power and render a subwoofer superfluous.
The fact your amp doesn't have an output for a sub means, even if you successfully connect it there is unlikely to be much activity from it.
The only sensible way to connect it would be as a ghost speaker as used by many hi-fi enthusiasts since the introduction of stereo.
The purpose of a ghost speaker is to fill a gap between the channels and is driven by the difference in emf between the loudspeaker positive of each channel. Unfortunately the difference between the channels isn't great enough to drive a loudspeaker so another amplifier will be needed.
As it is a surplus subwoofer you are trying to find a use for you should either obtain the signal from the bass unit of each speaker or use a crossover type filter in the output of the second amp.
1/27/2021 10:24:16 PM •
RCA Audio...
•
Answered
on Jan 27, 2021
Set time on RCA dual clock radio with fashion wrap? RCR 8622
I love the form of your question, as I wanted to wing the sucker myself, but got online before I actually pulled an Office Space on it. I found nothing, but I DID actually figure it out. Not super intuitive though. To set the time: Hold down the memory key in the middle until the number flashes. Use the arrow up/down on the right to set hour. Press Memory key again, repeat with arrow keys to set minutes. Hit memory key again. Alarm: Press/hold the Alarm button until the Alarm 1 or 2 flashes and press the side you want, 1 or 2, to set. Arrow time up/down, then do minutes, press alarm 1 again, select alarm or tuner, press alarm 1 again. Now I need to see if it will work in the morning. I know the flipping time is set though! Good luck. If you wing it, please post photos! :D
11/2/2020 3:54:11 PM •
RCA Audio...
•
Answered
on Nov 02, 2020
Set the clock on RCA RP-9325 Audio system
Slide the switch Lock/Wake/Clock on the top of the unit to clock position. Press REV or FWD to set the clock time. The time decrements or increments will follow by a faster rate when you press and hold the buttons. The ":" between hour and minute time flashes when you are setting the time.
https://voxxintl.zendesk.com/hc/en-us/articles/225310027-Operating-the-RCA-RP5420-Dual-Alarm-Clock-Radio
4/16/2020 12:34:23 PM •
RCA Audio...
•
Answered
on Apr 16, 2020
Remote code for rca blueray player
I bought a new universal remote because my RCA Home Theater remote went bad,took a few hours to figure out that I had to use the Audio remote code on the list.I have RCA RCRN06GR Blu-Ray Home Theater. The audio codes that came with my new remote are 41609, 41254, 41390, 41511, 42041. I believe it was 41254 but try them all if it doesnt work.
4/7/2020 6:14:29 AM •
RCA Audio...
•
Answered
on Apr 07, 2020
Not finding what you are looking for?
