Audio Players & Recorders Logo

Related Topics:

Question about RCA Audio Players & Recorders

1 Answer

Can I use a Pioneer Elite VSX- LX101and a Bose Acoustmass 9 powerized speaker system.

Thanks for the answer, but I still need more information, because the powered Acoustimass 9 sub unit has 3 cables cominng out, 2 RCA n one 3.5 mm, what I do with the 3.5 mm cable, besides the Pioneer has 2 sub pre-out, how can I use that? Any help is welcome.Pioneer is Elite VSX- LX101 and a Bose Powered Acoustimass 9 speaker system.

Posted by Felix Santos on

1 Answer

ADMIN Andrew

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • RCA Master
  • 57,403 Answers

You are only given one answer from our Expert Ray with the brief answer 'No sorry'.

This is your VSX

REAR TERMINALS

HDMI 4 in
HDMI 1 out
AV (Composite) 2 in
Audio 1 in (assignable)
Digital Coaxial 1 in (assignable)
Digital Optical 1 in (assignable)
Monitor Composite 1 out
Preout 0.1ch (SW)
Speaker 5 ch out (FRONT, CENTER,
SURROUND)

and this is your Bose. Find the manuals for both and read them. connecting them

https://www.techwalla.com/articles/bose-acoustimass-9-speaker-system-installation

A: Glancing at the specifications of the Bose Acoustimass 10, the system is stated to be compatible with A/V receivers and amplifiers rated from 10-200 watts per channel, and from 4 ohms to 8 ohms. Aug 17, 2014

Q&A: I Have A Bose Acoustimass 10 System, What Receiver ...

It is a pity you don't have a newer one that can be connected via HDMI lead.

Posted on Jan 13, 2022

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

I have buy a amplifier of pioneer model vsx-rs319v-k. My question is that can I please the bose acustimass 6 series 111. please let me know by email : [email protected]

Bose speakers are specifically designed to be used in conjunction with the Bose Acustimas Power Module and won't work properly just as ordinary loudspeakers connected to the Pioneer amplifier
You could connect the Bose Acustimass module to the auxiliary output of the Pioneer or via the HDMI repeater. However, if you do this you will still need a set of loud speakers connected to the speaker outputs of the Pioneer.
2helpful
1answer

Hello,I'm trying to conect 4 speakers(Bose 161,4-8ohms,50w each) and 2 speakers (JBL cf100(3way speakers),8ohms,100w each) to rceiver Pioneer VSX-455, I want to conect all of them at the same time.please I...

Well if you look on the back it plainly says speakers should be between 8-16 ohms.

It has facilities for 2 pairs of fronts (A and B) which could be run concurrently if they met the >8-ohm spec.

http://www.use.com/PIONEER_767cb5bb4ea6f30a06fc?p=7#photo=9

http://www.use.com/showorig.pl?set=767cb5bb4ea6f30a06fc&p=6

The JBL's would work best as primary front speakers.

http://www.retrevo.com/support/JBL-CF100-Speakers-manual/id/597bh151/t/2/

If you wired the Bose in series with each other, they'd work as one surround speaker 'pair' electrically, maybe even sonically if you arrange them across the sides and/or rear. I'd experiment.

http://products.bose.com/pdf/customer_service/owners/og_161.pdf

You'll need a separate amp for any center or sub speakers.

2helpful
1answer

@I got a bose acoustmass 7 it has three inputs left right center,and three outputs left right center dont have paper work I need like a diagram or instructions on hooking it up please help.

you need to run the left speaker output from the amp to the left speaker input on the Bose, the right speaker output on the amp to the right speaker input on the Bose, the center channel output on the amp(assuming it has one), to the center channel input on the Bose...then the right output on the Bose , to the right Speaker..the Left output on the Bose to the left speaker...and finally the center channel output on the Bose to the center speaker
0helpful
2answers

On my Pioneer receiver (model # vsx-9100tx) MCACC light keeps flashing and system will not power on. Please advise.

Hi the mcacc light keep's flashing and will not come on. Can you help with this thank you Lee
1helpful
1answer

Have a pioneer VSX-D603S and just added bose 100 watt speakers. As i turn up the volume the speakers keep cutting out. Not very loud before it cuts out. What can I do?

What model of Bose, how connected on what channels? Do you know the impedance? If they came from one of their all-in-one systems you're playing with fire (almost literally) mixing them with non-Bose amplifiers.
0helpful
1answer

Receiver for Bose AM-16 6.1 speaker

i added the vcs 10 center channel speaker for 180 to "upgrade" to the 7.1 and bought a new pioneer vsx-91txh receiver on ebay for 515.
0helpful
1answer

Bose 901 connection to Pioneer VSX-917v Receiver

any pre-out should work. i believe the bose have a rca jack connector for attaching to the receiver. look at the new receiver connection diagram. any output that is rca designed for use by a recording device will send a signal that the 901's can see.
always check the manual on both before connecting for any precautions.
good luck
mark
Not finding what you are looking for?

101 views

Ask a Question

Usually answered in minutes!

Top RCA Audio Players & Recorders Experts

The Knight
The Knight

Level 3 Expert

76851 Answers

Cindy Wells

Level 3 Expert

6611 Answers

 Grubhead
Grubhead

Level 3 Expert

5750 Answers

Are you a RCA Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...