I've been using my Motorola H700 with my LG phone for over 1 year with no problems. Now it will no longer connect, I've charged it till the light is bright green but my phone is not able to connect to it. When I push the call button I do hear it beep.

after pair successful highlight the headset and hit connect

I found the solution in the online manual from motorola. I have included the website below: http://www.motorola.com/mdirect/manuals/QG-H700_9499A88O.pdf

http://khaoohs.wordpress.com/2007/11/16/motorola-h700-bluetooth-blackberry-pairing/

this actually works.

1. allways remeber never pamper ur battries specially motorola which has a tradition of low battery life for all devices and less useage time per charge.
2 never charege very friquienrly, let the device get discharged till low battery indication then charge it to full and use .
3 if in warrenty report the problem to vender or buy a new one if  used for more than a year. hope this helps u chow::  [email protected]

how to replace battery of motorola h700 bluetooth hedset

With the H700 BT headsets the pairing mode is different from other BT headsets. to put it in pairing mode you first hold the talk button on the headset until the purple light comes on.Right after the purple light comes on you have to flip open the headset for it to stay in pairing mode. From there you continue through the phone. It will ask for a password; that will be "0000". then connect.

I say uninstall this device from the phone's bluetooth devices and reinstall it fresh

I'm having the same problem except my message says "seeking motorola h700" and keeps seeking until the h700 goes into powersave mode. I called motorola support and they told me to take it in for repairs( at my cost cuz the warranty is over). I've only used the h700 a handfull of times( I bought it more for optional convienience). I've got to say I'm pretty dissapointed with the durability with this product.

Steps to pair a H700 headset with any bleutooth pone:

1. Make sure the H700 fully chared (very important)!!
2. Make sure the microphone boom is folded closed, i.e. power is off!
3. Hold the call button for 1-5 seconds until the light is steady lit purple
4. Flip out the microphone boom, the light should stay lit purple!

Now you are ready to pair the headset with your phone, so follow the pairing instructions of your phone.

Note: When prompted for the Passkey; it is most likely 0000 but the correct Passkey should be on the headset accessory instructions.

I must add that indeed my headset on occation (once or twice every three months) also loses its connection with the blackberry (a 8703e) . At which time I have to remove the headset from my phone bluetooth device list, and start the above described steps to pair my headset with the phone again.

First: When charging the light should be steady. If the battery is less than 20% charged it should be red. More than 20% it will be yellow. Fully charged it should be green. Make sure your microphone is closed when charging.

Second: Have you "Paired" the H700 and the phone? If not you need to. To put the H700 into "Pairing Mode" do this:

Make sure the H700s microphone are is in the off position. Push in and hold the button on the H700 until the light lights up purple. Release the button and quickly open the microphone button. The light will stay purple and you are now in "Pairing Mode". Now follow the instructions for your phone to pair with a BlueTooth unit. When it asks for a code, use 0000 (that is 4 zeros).

Your phone and H700 should now be connected.

Hope this helps a bunch!!!