I have several questions about the Motorola H700, and any advise or help would be greatly appreciated.
First of all, I have a Samsung E730, and apparently it is compatible with the headset. My first question is, when the headset is charging, is the light supposed to be steady or does is flash every 5 seconds or so?
Secondly, I can't seem to get the phone to connect with the headset. I've tried everything and it just won't work.
I was hoping someone could help me?
Thanks a bunch!
An expert who has achieved level 2 by getting 100 points
An expert that got 5 achievements.
An expert whose answer got voted for 20 times.
An expert who has written 20 answers of more than 400 characters.
Re: trouble connecting h700 to phone
First: When charging the light should be steady. If the battery is less than 20% charged it should be red. More than 20% it will be yellow. Fully charged it should be green. Make sure your microphone is closed when charging.
Second: Have you "Paired" the H700 and the phone? If not you need to. To put the H700 into "Pairing Mode" do this:
Make sure the H700s microphone are is in the off position. Push in and
hold the button on the H700 until the light lights up purple. Release
the button and quickly open the microphone button. The light will stay
purple and you are now in "Pairing Mode". Now follow the instructions
for your phone to pair with a BlueTooth unit. When it asks for a code,
use 0000 (that is 4 zeros).
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Hold down the connect button on headset until steady purple light comes on, then open the boom.
Search for Bluetooth devices on the phone. When asked for a pin, use "0000". Now the H700 will show up in the Bluetooth device list, but it will not connect. Put the headset in pairing mode again, this time go to the h700 listed on the phone and select connect. Now the devices will work as normal. When you open the boom on the h700, it will connect to the phone.
If you have any more questions, just come back here and leave a comment - I'm happy to help.
After your phone has found the H700 you have to tell your phone to pair with it. It will then ask for the code. Punch in 0000 and confirm. After a little bit the H700 will flash blue several times rapidly and then start blinking about every 5 or 6 seconds. It is then paired with your phone.
On the left side of the page click Demos
When the demo window opens click, Select Demos button.
Scroll through the list until you see Sending Via bluetooth.
Follow the interactive instruction to connect to your H700.
You'll need to set your H700 into pairing mode when searching for the bluetooth H700.
It might be a good idea to book mark the main page.
I'm having the same problem except my message says "seeking motorola h700" and keeps seeking until the h700 goes into powersave mode. I called motorola support and they told me to take it in for repairs( at my cost cuz the warranty is over). I've only used the h700 a handfull of times( I bought it more for optional convienience). I've got to say I'm pretty dissapointed with the durability with this product.