Recent Solutions

• 

  After replacing the thermostat, car still over

  You may have a cloged radiator,bad water pump, or cooling fan is not operating ?  Worst of all a bad head gasket.

  • maurice_stub
  • May 27, 2012
  • Cars & Trucks
  • 1 Solution
• 

  i forgot my pattern password now i have to sign in using my username(email)...

  If you forgot you screen unlock pattern then you need to reset it. The simple procedure is mentioned below –Continue to enter the unlock pattern five times until you...

  • kirstiemclar
  • May 27, 2012
  • Cellular Phones
  • 1 Solution
• 

  afstand bediening werkt niet meer

  Step 1:Check the light on the remote , press a number. If the light is on, go to step 4. Not light, then go to step 2. Step 2:Check the...

  • r_bubberman
  • May 27, 2012
  • DVD Players
  • 1 Solution
• 

  1992 ford explorer fuel guage quit what is wrong

  First thing to check is the fuse (#18 I think). If that is still good then you should check to see if the sending unit in the tank is getting power by checking the two...

  • Chester Matthews
  • May 27, 2012
  • Cars & Trucks
  • 1 Solution
• 

  amp problems

  please clarify.....do you mean that there is no audio ???? no vocals (only instrumentals) is hard to believe??

  • chris_cox198
  • May 27, 2012
  • Car Amplifiers
  • 1 Solution
• 

  1990 mustang 5.0 runs ruff and spits and sputters and fluds out black smoke...

  Try pouring a full can of seafoam into the gas tank with a full tank. That should clean out all the carbon and build up on the valves while lubricating at the same...

  • david wagers
  • May 27, 2012
  • Cars & Trucks
  • 2 Solutions
• 

  Sony Cybershot DSC-W180 won't turn on when plugged into computer.

  Consider NOT connecting your camera to your computer.The best way to download pictures from your camera to your computer involves removing the memory card from the...

  • n_stout1996
  • May 27, 2012
  • Digital Cameras
  • 1 Solution
• 

  How to remove base and how much does tv weight with out base?

  Base on most sets is removed with set laid face down----be very careful as the screen is fragile on most flat screens---any downward pressure can destroy the...

  • cristibenede
  • May 27, 2012
  • Flat Panel...
  • 1 Solution
• 

  Fixya seems a bit flaky sometimes posting solutions freezes, and cannot...

  I've got the same probem David.

  • David Fildes
  • May 27, 2012
  • Web Site
  • 1 Solution
• 

  My Designer 1 races when I press the foot pedal or start button and will...

  Hello GloriaSince the machine does not stop sewing By: releasing pressure on the foot control AND by pressing "Stop" button, it appears that the problem is...

  • gloriamraz
  • May 26, 2012
  • Sewing Machines
  • 1 Solution
• 

  no cold water will come in

  make sure cold water is turned on first.lf it is then shut off cold and hot water to washer. take off cold water hose at water valve and check to see if the screen in...

  • Cristen B.
  • May 26, 2012
  • Washing Machines
  • 1 Solution
• 

  how to upgrade memory on an acer d255e notebook

  On the botom of your laptop there should be two compartment doors .... One is covering the hard drive and the other is covering the ram, there should be two...

  • David TannerSr
  • May 26, 2012
  • PC Laptops
  • 1 Solution
• 

  ice maker quit

  if ice maker is cycleing then it is either water frozen at the tube where water comes in. if it is then shut off refrig. remove icemaker and thaw tube out with a hair...

  • glenn w
  • May 26, 2012
  • Refrigerators
  • 1 Solution
• 

  I got a 917259570 Model# Craftsman will not fire at the plugs and the Coil...

  Make sure you have the air gao on your magneto set correctly, check/test your plugs.All the safety switches are working correctly?   Have your bypassed them?

  • Loren Cook
  • May 26, 2012
  • Riding Mowers &...
  • 1 Solution
• 

  fuel pressure regulator where is located at

  if you have  one it will be between the fuel injection or carberator and where the gas line come into the engine compartment.

  • Ron Arnold
  • May 26, 2012
  • Cars & Trucks
  • 1 Solution
• 

  fuel pressure regulator

  I would like to suggest that you get a Haynes Manual for this car. As it will not only tell you where it is located but also how to replace it step by step in most...

  • Ron Arnold
  • May 26, 2012
  • Cars & Trucks
  • 1 Solution
• 

  I lost my keys to my Chevy blazer 1996 yesterday

  No your ignition is a different lock but it could be keyed the same by a locksmith or possibly one could be ordered to match it from the factory based on your vehicle...

  • remzi_xdx
  • May 26, 2012
  • Cars & Trucks
  • 1 Solution
• 

  Ice Maker not receiving water past the valve? at the bottom of...

  tap gently on solenoid . it is probably stuck from corrosion. if that doesnt work you will need a new one. go to any appliance parts dealer they should be able to...

  • Robin Garner
  • May 26, 2012
  • Refrigerators
  • 1 Solution
• 

  wheel is straight left tire turns out

  TIE ROD IS DISCONNECTED,A CARTER PIN MAY HAVE CAME OUT,AUTOZONE HAS THEM.

  • shake311
  • May 26, 2012
  • Riding Mowers &...
  • 1 Solution
• 

  how do I attach a microwave model #721.80413 to the wallI

  if this is a above stove brand.. you have to open the top cabinet right on front lip of cabinet are three screws going into microwave... support unit and remove the...

  • Wes Wong
  • May 26, 2012
  • Microwave Ovens
  • 1 Solution
• 

  scott tv

  The power supply regulator section to your TV should be checked.  

  • zindogab
  • May 26, 2012
  • Standard Televisions
  • 1 Solution
• 

  assembly instructions for 8x11 sun shelter

  http://www.fourstari.com/Images/Manuals/Lawn%20and%20garden/12502708%20%208x11%20Sun%20Shelter%20-%20No%20parts%20available-%20discontinued%20item.pdf

  • kesnerpaula
  • May 26, 2012
  • Sport and Outdoor
  • 1 Solution
• 

  what is a evap system on a 97 seville sls

  This is Evaprative Emissions.  This is the system that keeps fuel vapors from venting to the air.  If you have a problem it may be Vent Solinoid, Gas Cap,...

  • ricky carter
  • May 26, 2012
  • Cars & Trucks
  • 1 Solution
• 

  1) Engine light temporarily - 2) unknown

  1.the engine light will be on when you ignight the car but if it stays on even when you finish you should start worrying. 2. That jerking might be transmission problems.

  • Leslie Wood
  • May 26, 2012
  • Cars & Trucks
  • 1 Solution
• 

  clutch fluid leak

  Well, it's something any everyday do it yourselfer would take on.  ( What portion of the 99% are we?)  The important thing is to stop the...

  • akoligian990
  • May 26, 2012
  • Cars & Trucks
  • 1 Solution
• 

  dm 4070 manual

  Several people before you have tried and tried to obtain this document and sadly i dont see any technical support from royal regarding this product and so...

  • Larry Miller
  • May 26, 2012
  • PDAs
  • 1 Solution
• 

  How can I charge Pamasonic DMC FS16 camera without having the charger with...

  Sorry, but you need a battery charger. It doesn't have to be original Panasonic one, however. A good camera store may have a "universal" charger suitable...

  • Eva Kilborn
  • May 26, 2012
  • Digital Cameras
  • 2 Solutions
• 

  how to charge samsung lumix dmc fs16 without charger

  You do mean "Panasonic" and not "Samsung", right?Sorry, but you need a battery charger. It doesn't have to be original Panasonic one, however. A...

  • Eva Kilborn
  • May 26, 2012
  • Digital Cameras
  • 2 Solutions
• 

  Speedometer on a 2004 GMC 1500 Extended Cab Speedometer not registering...

  gm has had many problems with the clusters used in those models

  • J. P. Dawes
  • May 26, 2012
  • Cars & Trucks
  • 1 Solution
• 

  Replace a demister light on my 80 series landcrusier

  BEFORE YOU DO THAT CHECK THE FUSES

  • Nathan Shepherd
  • May 26, 2012
  • Cars & Trucks
  • 1 Solution
• 

  p0700 trouble code for holden viva

  Diagnostic Test Code (DTC) P0700 is a generic, "informational" code, usually stored in the engine control computer, that is there only for the purpose of...

  • elizer genuino
  • May 26, 2012
  • Cars & Trucks
  • 1 Solution
• 

  viva p0700

  This code indicates that the Transmission control module (TCM) has asked the engine control computer  (PCM) to turn on the check engine light to alert...

  • elizer genuino
  • May 26, 2012
  • Cars & Trucks
  • 2 Solutions
• 

  What's your problem?

  You need to idendify the type of console and state the problem you are having with it...

  • nayakbrahman
  • May 26, 2012
  • Video Game Consoles
  • 1 Solution
• 

  whats the gass presser for escalled A/C

  28-32 on low side pressure port.

  • mohd qudah
  • May 26, 2012
  • Cars & Trucks
  • 1 Solution
• 

  when was my Maytag Atlantis MAV6300BGW serial 10168815zz made

  december of 2001http://www.appliance411.com/service/date-code.php

  • zac1954
  • May 26, 2012
  • Washing Machines
  • 1 Solution
• 

  Please tell me if a second hand electric control unit can be reprogrammed?...

  yes. like with any type of control module it can be reprogrammed. the problem is finding some one to have the equipment other than the dealer who can do it. most...

  • jwedm1
  • May 26, 2012
  • Cars & Trucks
  • 1 Solution
• 

  how can i get my puk pin

  You can get the Puk code from service provider...

  • dorothy e. reed
  • May 26, 2012
  • Cellular Phones
  • 2 Solutions
• 

  my Phillips 50 in tv doesn't turn on

  First thing of course is see if the fuse inside is good or bad.some general information: ISSUES: 1. IF sound main fuse/s are good. 2. If no power or standby check...

  • segolf206
  • May 26, 2012
  • Flat Panel...
  • 1 Solution
• 

  water pump

  No you do it under the hood, a very hard job and best left to experts.

  • martinstimes
  • May 26, 2012
  • Cars & Trucks
  • 1 Solution
• 

  no power to the vcr was watching disk hung up now no power

  The unit will shut down if there is a jammed mechanism to prevent a power supply from damage.Someone is going to have to open it and see if the disc can be removed to...

  • winnie55
  • May 26, 2012
  • DVD Players
  • 1 Solution
• 

  when pressing on brake pedal car shakes ?

  First check that your wheels are tightened to the correct torque. If they are OK, it looks like you will have to have your brake drums/discs machined to create a level...

  • vaporz28
  • May 26, 2012
  • Cars & Trucks
  • 1 Solution
• 

  I need free fujifilm S1500 camera manual

  You may download a copy of the manual here.

  • catalanking
  • May 26, 2012
  • Digital Cameras
  • 1 Solution
• 

  my Samsung LA32B550K1F T.V. has a flashing power light, and continuously...

  Standby light blinks are fault indications.  Visit this site for more details.  Type in the site name “Electro-help” either Google or Yahoo search box [not...

  • Ian Woolley
  • May 26, 2012
  • Flat Panel...
  • 1 Solution
• 

  Panasonic Viera 65 inch tv shut off, will not turn back on. Red light...

  Power supply or related to it.

  • Jim Farmer
  • May 26, 2012
  • Flat Panel...
  • 1 Solution
• 

  I need information on replacing the belt on my nordictrack cx995.

  You get full installation instructions when you buy a belt through www.treadmill-world.com/parts-manuals.html

  • Wayne ridings
  • May 26, 2012
  • Treadmills
  • 2 Solutions
• 

  i have a 97 ford taurus gl an the moter fans want come on i want to no...

  take the plug of for the coolant temp sensor and bridge the wires see if the fans cuts in if it doesnt come on sometimes the fan might be a faulty they use pancake...

  • shirley mcwilliams
  • May 26, 2012
  • Car Audio & Video...
  • 1 Solution
• 

  sharp aquos 45 lcd white screen, I can get int the service screen but cant...

  Visit this site for more details.  Type in the site name “Electro-help” either Google or Yahoo search box [not in the address bar of your browser], and click...

  • thebearborn6
  • May 26, 2012
  • Flat Panel...
  • 1 Solution
• 

  need a base for Hitachi P501H401

  You could visit the Hitachi consumer website or call them.You could also Google the model number with "pedestal stand"  "mounting base" etc as...

  • Jewel Hefner
  • May 26, 2012
  • Flat Panel...
  • 1 Solution
• 

  remove rear seat

  its got clips underneat the seat pull those up

  • dwmsmall
  • May 26, 2012
  • Cars & Trucks
  • 1 Solution
• 

  how to clean fuel lines

  best way to do it remove your fuel tank then flush it but if you gonna do it yourself take it of from fuel filter then injection rail too blow it with the airline:)

  • jennifer espinosa
  • May 26, 2012
  • Car Security Systems
  • 1 Solution