Where can I purchase replacement paper feeder rollers for the Canon Fax L900

Open the document feeder. Inside you will find a grey feed roller. Cleaning this roller with a cloth dampened with water will help with these paper jams in the document feeder.

Check whether any piece of paper is stuck. This may due to paper feeder/out roller may having the issue. Replace/repair will resolve your problem.

Thank you for using Fixya.

Try cleaning the pickup and separation rollers and /or pad inside the document feeder. If this doesnot help they need to be replaced contact your local canon dealer for help with parts.

Yes, there is an easy solution, possibly. Mainly because you say it may do a single job, and then it keeps jamming. Do you see the second sheet jamming in when it is not called for? Anyhow, you may try cleaning the rollers, all of them, like I did here: http://annoyances-resolved.blogspot.com/2009/09/paper-jam-buy-new-laser-printer.html This completely solved my problem of persistent paper jams.

Open the doc feeder and clean the roller and pad with alcohol.

Press Dataregistration-set-usersettings-set ,change the name and number in this mode.

Replacing the roller can be prety extensive work. Try to check and make that the pick-up roller on the bottom is flat across sometimes it can get turns backwards and it has a round side that will not grasp the paper. If this is ture just take your finger and push the roller forwards. You can alo take a clean wipe and wipe off all of the rollers the rollers are made to be a little tacky when they start to get a little older dust can build up on them causing them not to grab the paper

Depending on the machine, the setting will be in one of two locations, In your menus under either Machine Settings or Fax Settings. You will find the machine ID, That is where you change it.

here is the manual, look under maintenace


http://www.retrevo.com/s/canon++lc+8500+manual

Relax ti mal- the rollers are not picking up the paper because they are dirty or worn out.

Try this clean the rollers with alcohol and try, are the rollers smooth or do they have a rough feel? if smooth replace and it should be good as new.

Good luck