Samsung ML - Recent Questions, Troubleshooting & Support - Page 5

http://www.samsung.com/us/support/owners/product/ML-2010here you go

we have samsung ml1640 refil solutions.
easy to reset after reset pritner counter.

www.chipresetters.com

Regards
Jayendra
msn:[email protected]
www.chipresetters.com

HiWhats your operating system?Choose your operating system from the available downloads on the link below:www.samsung.com/us/support/owners/product/ML-2510Hope it helps.Thanks!Ken.

Make a service request here or contact Samsung here

Try fuser door should be in the back. If it is close, it could be a door sensor issue. Also make sure that the fuser is in correctly.

Hi, If the HDD still spins up then you may be able to plug it in to another computer as a secondary and then either be able to view and copy the data straight from there ir if it unaccessible in normal ways there is software that will be able to view and copy off most of your data.

If the HDD is stuck or jammed and does not spin then unfortunately there is not much chance of getting anything.

Let me know how you go
SeaJade

Dear You can try from samsung site. Printer Support SAMSUNG India Thanks.

I resolved this problem by re-installing the 2.00 driver from http://www.samsung.com/us/support/downloads/ML-2010.

Replace chip or
Reset Printer using reset software (permanent solution)
[email protected]

You can download the printer driver from the Samsung WEB download site, please click on this link to download :-
http://www.samsung.com/sg/support/detail/supportPrdDetail.do?menu=SP02&prd_ia_cd=06010400&prd_mdl_cd=&prd_mdl_name=ML-1710#

wellcome in fixya .com


please click on this link where u can find the driver of samsung ml-2519 for vista

Alternative driver download link: Samsung ML-1750 Printer Driver

need for samsung ml 1666 chipre set software

I got the same problem. It seems they did not develop specific drivers for win98se. However, I found that you can print using the drivers for the old Samsung ML-2510. Win98se drivers for that printer can still be downloaded from Samsung website. I've been using the 2510 drivers with the 1640 printer for a couple of months, and worked fine so far. It seems very little change in electronics from the 2510 to the 1640 model.
You need also Virtual Printer Port for USB from microsoft.

i found it here:

http://www.samsung.com/us/support/detail/supportPrdDetail.do?menu=SP01&prd_ia_cd=&prd_mdl_cd=&prd_mdl_name=ML-2010

Make sure to look for the little "driver" tab if all you see is the guides.

It's hard to see.

http://www.samsung.com/us/support/detail/supportPrdDetail.do?menu=SP01&prd_ia_cd=06010400&prd_mdl_cd=ML-1630%2FXAA&prd_mdl_name=ML-1630&prd_ia_sub_class_cd=P
This is a link to Samsung for MAC drivers for your ML-1630

All can be found here
http://www.samsung.com/uk/support/detail/supportPrdDetail.do?menu=SP01&prd_mdl_name=ML-2010

You can replace toner for that printer only with genuine Samsung toner because refilled toners are not working.