Question about Samsung ML-1640 Monochrome Laser Printer

1 Answer

Firmware of ml 1666

I have upgraded firmware of ml 1640 on ml 1666 after installing printer a problem occur that my printer ml 1666 printer shows as a ml 1640 I have installed ml 1640 driver also but printer doesn't work both indicator blink (power and copy) and does not goes warming up does it have solution for this case please help me.....

Posted by jeet on


1 Answer


  • Level 1:

    An expert who has achieved level 1.

    New Friend:

    An expert that has 1 follower.


    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

Need for samsung ml 1666 chipre set software

Posted on Aug 23, 2012


5 Related Answers


Craig Nel

  • 4 Answers

SOURCE: Cannot install the Win 7 64-bit printer driver-Samsung ML-1640

download here and run the file in administrator

Posted on Jan 04, 2011



  • 1 Answer

SOURCE: Driver for Samsung ML-1640 for WIN98SE

I got the same problem. It seems they did not develop specific drivers for win98se. However, I found that you can print using the drivers for the old Samsung ML-2510. Win98se drivers for that printer can still be downloaded from Samsung website. I've been using the 2510 drivers with the 1640 printer for a couple of months, and worked fine so far. It seems very little change in electronics from the 2510 to the 1640 model.
You need also Virtual Printer Port for USB from microsoft.

Posted on Jan 20, 2009


SOURCE: Installation problems SamSung ML 2510 printer with Windows XP

Why no updates? No windows validation? That could be your problem if that's the case.
If not, I suggest going to Windows update and at least installing all critical updates, if not SP3 as well, and try again

Posted on May 20, 2009


  • 259 Answers

SOURCE: in samsuung ml 1640 laser printer red light is continiously blink

call me or visit my web saite

Posted on May 18, 2009


  • 50 Answers

SOURCE: My laser Printer ML-1640 & ML-2240 shows a

Here it is:

I have tested this on a printer with the following versions:

OS Version -
Engine Version - 1.00.49
SPL Version - 5.07

I am using the original initial cartridge.

I think if you want to use a replacement cartridge, you have to disconnect CN5 and short out CN9. This way the toner will always be treated as the initial cartridge.

Posted on Mar 03, 2010

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

I want to reset Samsung ML 1640 printer.


Dear upgrade your printer firmware. this the one way to reset the printer.

For download the firmware Click hear and see the instructional how to upgrade the firmware.

May 27, 2011 | Samsung ML-1640 Monochrome Laser Printer

2 Answers

I downloaded an update from Samsung "firmware" and

you are fucked up. REMEMBER: never upgrade your printer firmware if you want to use re-manufactured toners. You can't return to prevision version of printer firmware. You have to look for some new hacked firmware version and then everything will be OK. This firmware usually is not for free.

Feb 20, 2011 | Samsung ML-2240 Laser Printer

1 Answer

Samsung ML-1640 printer:After count 2100 it displays Exausted.replace with new tonar

The start cartridge is for 700pages only and then if you are refilled the cartridge you have to put new chip because after 2000pages printer stops printing. You can upgrade firmware to fixed version, so you will be able to put and use any cartridge of this kind (even for 3000pages)

Feb 15, 2011 | Samsung ML-1640 Monochrome Laser Printer

1 Answer

Hp Laser Jet 4350dtn network printer is showing Service Error 49.4C02 how do I fix

Does it occur on any print job or one in particular. If it happens with one job, that job has a problem. It isn't the printer.
If it is all printing go the then go to "support and drivers". Then select your printer, select your operating system, select firmware. Upgrade your firmware. Make sure that you read the instructions and DO NOT touch the printer while it is upgrading.
If the firmware upgrade completes and the errors continue, you will need to replace the formatter.

Dec 23, 2010 | HP LaserJet 4350dtn Printer

1 Answer

When i start it show 2 redlight and its blinking

The Firmware Maintenance CD, which shipped with Rapid Deployment Pack - Windows Edition 3.50, allows the iLO 2 firmware to be successfully upgraded using the "Upgrade ProLiant ML/DL/BL Firmware" job in RDP.
For more information on Rapid Deployment Pack - Windows Edition, refer to the following URL:

Jan 25, 2010 | HP Compaq ProLiant ML530 Server

1 Answer

Upgrade firmware of toshiba estudio 168

very possibly but you will find this very difficult because that machine requires special jigs to upgrade firmware.

Sep 04, 2009 | Toshiba Office Equipment & Supplies

3 Answers

Red light comes after refill

Download from this site Raw Package for ML-1640 You will find 5 files in this package:
  • ML-1640_V1.01.00.83.exe is the official firmware upgrader
  • downl1640.bat is the firmware downloader (to printer)
  • fix1640.bat is the firmware patcher
  • fixml40.exe is the tools run by the patcher
  • usbprns2.exe is the tools run by the downloader
Unzip and start usbprns2.exe than downl1640.bat, at the end press any button and for 16 seconds you have printer reset.
And that is it, you are free to do what ever you want, but be careful if you reset with empty toner it will also show that toner is full.
Also the are no chip in toner, it is only mechanical part.cc156fa.jpg
Save the money for toner refill. See ya

P.S- Was this helpful? Say YES

May 22, 2009 | Samsung ML-1640 Monochrome Laser Printer

1 Answer

Installation problems SamSung ML 2510 printer with Windows XP

Why no updates? No windows validation? That could be your problem if that's the case.
If not, I suggest going to Windows update and at least installing all critical updates, if not SP3 as well, and try again

May 18, 2009 | Samsung ML-2510 Laser Printer

1 Answer

Hp 2420 service code 49 2F90 what does it mean?

A critical firmware error has occurred.
Go to http:
support/lj2420, or
Click Download Drivers and
. Check for the
latest firmware image version
at the bottom of the page. If
this firmware image is newer
than the one installed on the
printer and the printer can
receive a firmware update,
download the newer firmware
upgrade. Not all printer
models can receive firmware
Failing that replace the formatter

Aug 13, 2008 | Office Equipment & Supplies

Not finding what you are looking for?
Samsung ML-1640 Monochrome Laser Printer Logo

1,188 people viewed this question

Ask a Question

Usually answered in minutes!

Top Samsung Office Equipment & Supplies Experts


Level 3 Expert

1363 Answers

Tareq Bin Mostaq...
Tareq Bin Mostaq...

Level 3 Expert

1449 Answers

Muntejaya Ginting
Muntejaya Ginting

Level 3 Expert

10422 Answers

Are you a Samsung Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides