My Mp3 Player Only Has 64 Songs Downloaded
check the capacity...it depends on the size of the songs you downloaded...you can check the capacity of your mp3 player by pressing right click and check the properties of your mp3 player
My computer wont recognise my dvd burner but it
Is your DVD drive a Combo DVD ROM and CD Read/writer? If so it cannot burn DVD only reads DVDs and read and burn CDs.
If the program cannot find a DVD burner then either the burning software cannot support that model DVD burner ot the DVD burner is faulty.
To test the DVD burner, remove it and install it into another computer to test the burner to see if is faulty.
I CANNOT PLAY REGION A DVDS ON MY 3D BLU/RAY
No disc in tray Press Home Scroll to settings input code: 13893108520 The settings will pop up and you will see that the DVD region is now set to 0 (meaning region free). I have checked the hack on a BDP8000 (region 2)and it sets the region to 0 (the 7th. digit from the left) alright, but it does not make the player region free as a message from the disc (MGM) comes and tell that the disc is not supposed to be played in this region. The region on the player can be changed to the region by changing the "x" in 138931x8520 to the actual region you want to play.Try this out. The hack codec for blue ray are not yet published so it is not possible to make Blue Rays totally region free as of now.
6/15/2022 12:51:36 PM •
Philips...
•
Answered
on Jun 15, 2022
Philips AndroidTV 65pfl5504/F7 keeps restarting
Hi Dakota...Unfortunately, most Funai brand sets like this are hard to troubleshoot as there isn't legends on power board to know what pin is what and no service information is available. Generally the fault you're describing comes for a boot error or bad EEPROM that's located on the main board, it's not impossible for a power supply to cause this but it's not likely, another possibility would be bad backlights. On most sets there are markings as to what pin does what and the power on pin can be tested for around 3 vdc but that's not an option on this TV. I'd replace the main board, there is about a 75% chance of that fixing it.
5/29/2022 8:10:21 PM •
Philips...
•
Answered
on May 29, 2022
Philips tv won't turn on.
Hi,
please remove any attachments that are on the tv (ie game console, external speakers and attempt to power the tv on again. If that does not work, please check that the tv is powered directly by an outlet and not a power strip. Thank you.
5/28/2022 10:24:58 PM •
Philips...
•
Answered
on May 28, 2022
Philips streamium bios battery?
NO model toldwell in a shop lacking the $100 service manual what do they do?amazing fact they look inside for any coin cell at alljust look, firstdismantle it look/some have sockets and others are soldered down or , there is no such thing.why not stated what works and does not and ask fordiagnostics help. steps.yes batteries fail, all there not changed out yet?if only remote dead it too has batteriesis UNIT DEAD is screen dead, or stuckis wifi only failing.is it struck in stand by mode?page 33 do the RESET YET?lost AC powerlost AC power pack or using the wrong pACK>water dripped in to the unitlclicker dead.no evidence told so answers will be impossible.Philips NP2500/37 WiFi Internet Radio Network Music Player with Rhapsody my wide guess on real name.did you read trouble page in your lost manual.?but only covers wifi. https://www.download.p4c.philips.com/files/n/np2500_37/np2500_37_dfu_eng.pdf
5/25/2022 1:11:17 PM •
Philips...
•
Answered
on May 25, 2022
Osd main controls locked/unlocked pops up every 5 seconds
Hi,
Press the Menu button ( marked OK) for one minute, or more, and a blue/red menu list should appear on screen.
Using the adjust button (immediately to the left of the OK button) by pressing the arrows at each end up or down as required you can enter the menu and select an action by scrolling.
At the end of the list of possible adjustments on the left of the screen (brightness, contrast, etc) is the Reset section.
On the righthand side of the screen is a flashing Yes No choice which automatically alternates.
The trick is to select the Reset choice on the left and while selected press the OK button when the Yes alternative on the right of the screen is flashing.
You VDU should then Reset and all will be well.
5/8/2022 11:35:37 AM •
Philips...
•
Answered
on May 08, 2022
My philips 191EL LED monitor
simply long press input and power touch buttons to reset the ic program and it will be ok be sure to wait 5-10 seconds note: be sure the led has display input and powered on with the problem your encounting thanks ok
5/8/2022 10:20:59 AM •
Philips...
•
Answered
on May 08, 2022
Not finding what you are looking for?