I printed a document after which the printer continues to print out blank pages and won't stop. I do not know how to shut it off. I don't even find an off/on button. the small left green light continues to blink until the paper runs out, then it is orange.

Printer Printing blank page issue can be occurred when you have low or dried ink cartridge, blocked nozzles, dirty print head and ink cartridge installed improperly. Follow the troubleshooting steps to fix printer printing blank pages:


·Restart the printer
·Check printer ink cartridge
·Clean the printer print head
·Update the printer drivers

Follow more steps to fix the Printer printing blank pages issues

Have you checked the print que
Printer problems can be a real hassle.
From time to time, due to document layout or settings on your computer, in your software of choice, or even on your printer, a blank page may get "printed" with the rest of your document.
Fortunately, this issue is a simple one to troubleshoot.
Click "Print Preview" when you are finished with your document and ready to print.
Observe your document.
If you see an extra, blank page, you have created a second page.
To delete the second page, close Print Preview, go back into the document and eliminate any blank lines in your documents that you may not need.
You may also find an inadvertent page break at the end of your document.
Place your cursor on its symbol and delete it.
Locate the symbol by clicking on the Show Formatting paragraph icon in the toolbar.


Circumvent this "ghost page" if you do not see a second (or additional) blank page in Print Preview.

Specify the number of pages you wish to print, within the Print dialogue box.
This is typically done by selecting the "Print From" option, then entering the page numbers desired.
If your document happens to be ten pages (without, of course, that final blank page), then enter in the "Print From" field the numbers "1-10".
This will print only pages 1 through 10, without an eleventh (blank) page.

In the printer's dialogue find the print pages number. Print page from/to and select 20 pages chunks. In effect print only part of the document at a time. Add all chunks together in one pile. Work around I know, but it works.

If you're using Windows, try to follow these steps to fix the problem.

1. Start menu > Printers & Faxes > Lexmark Pro200 Series Properties window pops up > go to Advanced tab > Printing Defaults.
   
2. The Lexmark Pro200 Series Printing Preferences window pops up > go to Advanced tab > More Options > under Suppress Blank Pages, enable "Enable blank page suppression"
   
3. Save the setting.
4. Try to print a document again to verify that the problem is fixed.

Hi,

Your problems states that photos are being blank when trying to print it.
Please try these tips.

• Make sure your printer is selected in the Print window or in the Macintosh Page Setup and Print windows.
• The print head nozzles may need cleaning.
• Make sure your printer software settings are set for the paper size you're using.

Plus,i also wanted to know if you can print ordinary documents or print a test page.

Hope this helps.

Thanks,

FixerDelta

I suspect that you are looking at a flow control issue and not a printer failure.

You can check the printer driver and make sure your printer options for background printing.

Also, make sure that your document is not too busy. I've had customers complain about slow printing documents and when I examined the documents, I discovered that there were multiple images overlay ed. The data still had to be sent, but only the top image printed.

Don

paper size problem .

goes to my printers page right click on printer select open in print queue select print job the click on stop printing

test page printing but doc files not printing....

HP DeskJet 6940

this is your data cable problem change datacable
and change setting to your computer cmos setup
go cmos setup find parralal port mode option select EPP+ECP


First you change your datacable if problem can't solve so change
cmos setup option