May 05, 2013
kishor kumbharePrinter canon mp258 scane problem error code 2,140,2
May 05, 2013
my cnnon pixma mp 258 printer shows E31 while scanning
please solve the problem
×
Brother printer error code TS-05 is an association Failed mistake happens on the WLAN report. The mistake code TS-05 implies that your Brother printer isn't associated with your home remote system. The primary is your SSID and Network Key is inaccurate, because of WLAN passageway/switch can't be recognized. At that point don't take pressure about it. You essentially annihilate or brother printer error code TS-05 you simply need to pursue the means which are offered underneath to fix it.
To Solve your issue related to a printer please visit us brother printer error code TS-05
SOURCE: my printer canon pixma mp258
Indicator appears blinking lights on the printer " P,O, 8′. That Mean The print head temperature above the specified value. You can replace the ink cartridge or refill the cartridge. Step to resolv this error Step 1 : Turn Off Printer Step 2 : Remove Cartridge Step 3 : Refilling the cartridge Step 4 : Reinstall the cartridge Step 5 : Turn The printer ON If it still does not work you can use the following methods How To Reset MP 258 error 5200 Step 1 : The printer is off and plug the power cord. Step 2 : Press the button STOP / RESET and hold, then press and hold the POWER button Step 3 : POWER button still press, release the STOP / RESET, then press the STOP / RESET 2 times in a state of the power button is pressed. Step 4 : Release both buttons simultaneously Step 5 : The printer will proceed in a while (a while), then the LCD panel will show the number zero (0) Step 6 : Computer will detect NEW DEVICE, Ignore it... Step 7 : Press the power button, then the printer will turn off Step 8 : Press the power button again, then the printer will be ready to use
SOURCE: my canon mp258 show error code p08 ,,what to do
printer canon mp258 eror code 5200
or p08 warning in printer
SOURCE: Canon PIXMA MP140 error code E 2
error E 2 =>
The machine is out of paper. / Paper does not feed.
Reload paper in the Auto Sheet Feeder and press the Black or Color button.
SOURCE: how to fix error code 5200 on canon printer MP258?
Here's the procedure. This code is normally encountered after refilling an ink cartridge and replacing the cartridge. Turn off printer. Hold down Stop/Reset button with one hand and turn printer on with other hand. After green light comes on for the ON button, press the Stop/Reset button two times and you should see the green light blink off and the orange alarm light blink "on" with the first press and then the green light comes back on for the power button and the orange light goes off with the second press (if you did it correctly). Now, you need to hold down the ON button about five seconds, then let go to shut OFF the printer. When you turn it back on, the printer should be back to the factory original condition. Make sure you set all your printer properties the way you want them again from your printer properties dialog boxes because some of the settings may have been stored in the printer's EEPROM, which you just reset to get rid of the offending alarm code.
2,682 views
Usually answered in minutes!
Printer canon mp258 scane problem error code 2,140,2
Printer canon mp258 scane problem error code 2,140,2
Printer canon mp258 scane problem error code 2,140,2 give me solution
×